录音/制作/创作 吉他 扩声技术 视频技术 作品展示 生活 信息 更多... | 音频应用专卖店

[教程] 分享个人安装 Trilian MAC (Mojave) 的过程

( 10 )
 
[收藏]

分享个人安装 Trilian MAC (Mojave) 的过程


17
大家好! 这几天花了一些时间整理了电脑,也顺便安装了Trilian. 过程中遇到了不少的挑战,除了在这论坛上搜到的一些tips,还在国外论坛学到了一些解决问题的方法。我把个人的经验整理供大家参考。因为中文不太好,所以会以英文述说。

----------

TL;DR..

These steps should be applicable to MacOS EI Capitan and above:

OS: MacOS Mojave 10.14.5
DAW: Logic Pro X 10.4.4
Reasons for the workaround: New MacOS has new security protection enhancements, which prevents the software from being installed correctly. Also, most of the Trillian setup disks available on the forum are old one, meaning they are 32bit components, and won't work out of the box in Logic X especially under the new OS which are native 64bits.

Step 01: Reboot MAC, press CMD+R to enter recovery mode.

Step 02: Once in revovery mode, select terminal. Enter the following command and press enter:  csrutil disable

Step 03: Reboot your MAC again

Step 04: Goto Finder, enable the permission (Read & Write) for both the Library and Application Support Folders


Step 05: After unziping the setup disk 1, you should see the follwing structures


Step 06: Goto Updates folder, unzip Trilian_Software_Update_Mac_1_1_4c.zip

Step 07: Hold the control button and click the file called "Trilian Plugins.pkg" inside the Updates folder.  ** Run the setup. No need to change the location of the setup for this one..

Step 07: Mount the Trillian 1.4 setup disk 1 to 5.

Step 08: Goto Disk 1, the Mac folder. Hold control button & click "Trilian Disc 1.pkg". Select show package contents


Step 09: Hold Control button & Click "Trilian Disc 1 Core Library.pkg", select Open


Step 10: Run the setup. ** If you previously installed Omnisphere 2 on your machine, remember to change the location of the setup here to match the location where Ominisphere 2 previously been installed. Changing the location to match Omnishpere 2 folder is mantorary if you installed it before Trilian.

Step 11: Repeat Step 08, 09 & Step 10 for Disc 2 until Disc 5

Step 12: Goto the Crack folder which is part of the Disc 1 content, unzip "Trilian 1.1.4c Mac patched.zip"


Step 13: Copy the following files in Trilian 1.1.4c.AiRprep folder to overwrite the one in our MacOS local disc:
   Trilian.component to /Library/Audio/Plug-Ins/Components/
   Trilian.vst to /Library/Application Support/Digidesign/Plug-Ins/

Step 14: Download 32 Lives version 2.0.5. Install it. (The default is Trial version, but good enough for you to try out whether Trilian is working on your machine. Can decide whether or not to buy this or go for other alternatives)

Step 15: Run 32 Lives, both the Trilian.Component and Trilian.Vst should show up. Select Resurrect option

Step 16: Run Logic X, you should see Trilian running if you completed all the steps above accordingly.


Step 17: Run the Keygen.exe using CrossOver or WineHQ. Generate the code and paste it back to Trilian. Restart Trilian and Logic.

These are all the steps that work well for me. I repeated the steps twices with clean setup and so far working as expected.





本帖最后由 delphi32 于 19-6-7 16:38 编辑

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x

643
100G真大 本帖最后由 流星闪闪 于 19-6-7 16:17 编辑

2782
Trilian不是最难装的  最难的应该是Keyscape 在MAC上为了这货的最新版安装 折腾得够呛
你音色库没升级,现在最新是1.4.9c
本帖最后由 jinyuze 于 19-6-7 18:26 编辑

696
一想想要更新系统 头就大了 貌似四巨头mac最新系统都不太好装

726
太难搞了,还是知难而退吧。

269
怕折腾就上正版啊

95
感谢分享,挺复杂的

17
其实只要安装好Ominishpere 2.0 或以上的壳,就可以直接加载 Keyscape 音色如下:



将的音色拷贝到Steam\Keyscape folder 里就行了。

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x

205
非常感谢!

14
jinyuze 发表于 19-6-7 16:49
Trilian不是最难装的  最难的应该是Keyscape  在MAC上为了这货的最新版安装 折腾得够呛
你音色库 ...

請問你在10.14.5的系統下 keyscape有註冊成功嗎? 謝謝

411
delphi32 发表于 19-6-10 16:05
其实只要安装好Ominishpere 2.0 或以上的壳,就可以直接加载 Keyscape 音色如下:

这个真不好用,一是加载Keyscape要等很久(这一轨是工程里加载的最慢的),二是用着用着有时候就突然把整个工程文件直接跳出
您需要登录后才可以回帖 登录 | 注册

本版积分规则

搜索