录音/制作/创作 吉他 扩声技术 视频技术 作品展示 生活 信息 更多... | 音频应用专卖店

[新闻] Sonarworks Reference 4 Studio Edition v4.3.5 WIN补丁版

( 36 )
 
[收藏]
-  第 1 页  -

Sonarworks Reference 4 Studio Edition v4.3.5 WIN补丁版


2151


Reference Systemwide upgrade calibrates all of your outgoing audio. Finally a dependable sound standard is now available outside of DAW for seamless production and referencing. No more dragging files into your DAW project just to have a listen or figuring out how to check if your kick blasts as hard as the best of them on Soundcloud.

Response Curve view
Add or remove various frequency response curve visualizations to your frequency graph. See your room sound before and after the correction, look at your left and right driver response individually or follow your overall phase alignment while using different filter modes.

Reference Curve Presets
Enhance your mixing and listening experience by choosing between our predefined reference curves and speaker simulations. Reference, guide and choose between several popular speaker simulations by tilting, adding or decreasing some bottom end.

Reference sound everywhere
Reference 4 Systemwide allows using calibrated sound for critical listening from any playback source. No more dragging files into your DAW project just to have a listen or figuring out how to check if your kick blasts as hard as the best of them on Soundcloud.

Mono Monitoring
Mono never left! There is a handy option to switch your mix to mono, but still maintaining a stereo correction, giving you an easy way to check if your mix will sound good in mono as well.

Avoid clipping
Our Audio Calibration Engine boosts some frequencies to fill in the frequency response dips, and to make your speakers sound precise. By flipping the “avoid clipping” switch you will ensure that your audio output does not get become distorted when calibrated.

Dry/Wet control
This is not a conventional Dry/Wet knob that is used to mix the effect in parallel! The correction curve is actually being smoothed out when you raise or lower this knob to gradually reduce or increase the effect of a calibration.


V.R
DATE:08.2019

Win32/64补丁版) AAX*, RTAS, VST, SAL
Sonarworks Reference 4 Studio Edition v4.3.5 380 MB



*请购买正版最稳定*
官网:https://sonarworks.com/
本帖最后由 振青虫 于 19-8-27 09:05 编辑

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x

2151
观众反应

1478
感谢虫兄!

1606
6666

12615
太牛了,没硬件能用吗

14701
得用他家专用话筒,我买了一支。500多元淘宝

14701
hjun 发表于 19-8-27 09:32
太牛了,没硬件能用吗

买他家话筒

2028
伊拉拉塔lala 发表于 19-8-27 10:35
得用他家专用话筒,我买了一支。500多元淘宝

不需要  其他品牌的测量话筒也能用  测量的时候有相应选项可更改

558
用普通话筒可以吗?比如舒尔sm58

14701
jlbroly 发表于 19-8-27 11:12
用普通话筒可以吗?比如舒尔sm58

舒尔肯定不行

2028
jlbroly 发表于 19-8-27 11:12
用普通话筒可以吗?比如舒尔sm58

理论上测量声学时  需要使用曲线较平直的专业测量话筒
不过 用SM58也行  
前提是 通过Smaart等软件,将其与一只专业的话筒做对比,生成差值曲线
然后反向后 就成了SM58的校正曲线

在Sonarworks中 同样可以调用这条校正曲线  使你的SM58变成“准声学测量话筒“

12615
ski_1512 发表于 19-8-27 14:25
理论上测量声学时  需要使用曲线较平直的专业测量话筒
不过 用SM58也行  
前提是 通过Smaart等软件,将 ...

厉害,想问问414有没有配置文件?

558
ski_1512 发表于 19-8-27 14:25
理论上测量声学时  需要使用曲线较平直的专业测量话筒
不过 用SM58也行  
前提是 通过Smaart等软件,将 ...

谢谢您。

1318
6666

781
虫哥求MAC 的Reference 4
您需要登录后才可以回帖 登录 | 注册

本版积分规则

搜索