看了下说明，这么多步骤，这些都要自己去官网下是么？
THIS IS THE CUBASE PRO 14 PATCH COMMAND YOU CAN LEAVE SIP CAN BE ENABLED !!!
- This method works for any Cubase Pro 14.xxx version -
1. Install Library Manager
2. Install Mediabay
3. Install Cubase Pro 14.0.32
4. Install Cubase Patch
—————————————————————————————————————
5. Install the Apple Certificates by double clicking on each of them
6. Install Xcode from the App Store.
7. Open Xcode and go directly to the system tray → Xcode → Settings
8. Click on the ‘+’ in the corner bottom left
9. Select ‘Apple ID’ and hit continue
10. Enter your Apple ID and password etc.
11. Once finished, click on your Apple Developer account in the list on the left
12. Click ‘Manage Certificates...’
13. Click the ‘+’ button in the lower-left corner and select ‘Apple Development’.
*You now have your own development certificate in your keychain!
14. Open the ‘Keychain’ App (via Spotlight)
15. On the top bar in the middle, filter by ‘certificates’
16. In the search bar, type in ‘Apple Development’
17. You should now see your own certificate that looks like this:
Apple Development: youremail@address (XXXXXXXXXX)
18. Double click on the certificate in the list
19. Click on the small down arrow under ‘trust’
20. In the main dropdown menu, select ‘use system standard’ (important!)
21. Your certificate must show green check. (It may take a few minutes...)
—————————————————————————————————————
22. Put 'Cubase_14_Patch_Command' on your desktop
23. Open Terminal
24. Copy the following line:
chmod +x ~/Desktop/Cubase_Pro_14_Patch_Command
25. Open 'Cubase_14_Patch_Command' from your desktop
26. Follow the instructions in Terminal
The script was written by Superhero123 Special Thanks to Team V.R.
这是CUBASE PRO 14补丁命令，你可以离开SIP启用！！！
-此方法适用于任何Cubase Pro 14.xxx版本-
1.安装库管理器
2.安装Mediabay
3.安装Cubase Pro 14.0.32
4.安装Cubase补丁
—————————————————————————————————————
5.双击每个Apple证书安装它们
6.从App Store安装Xcode。
7.打开Xcode，直接进入系统托盘→ 项目→ 设置
8.点击左下角的“+”
9.选择“Apple ID”并点击继续
10.输入您的Apple ID和密码等。
11.完成后，单击左侧列表中的Apple Developer帐户
12.单击“管理证书”。..’
13.单击左下角的“+”按钮，然后选择“Apple Development”。
*现在，您的钥匙链中有了自己的开发证书！
14.打开“钥匙扣”应用程序（通过Spotlight）
15.在中间的顶栏上，通过“证书”进行过滤
16.在搜索栏中，键入“Apple Development”
17.现在，您应该看到自己的证书如下：
苹果开发：youremail@address（xxxxxxx）
18.双击列表中的证书
19.点击“信任”下的小向下箭头
20.在主下拉菜单中，选择“使用系统标准”（重要！）
21.你的证书必须显示绿色支票。（可能需要几分钟……）
—————————————————————————————————————
22.将“Cubase_14_Patch_Command”放在桌面上
23.开放式终端
24.复制以下行：
chmod+x~/桌面/立方体_Pro_14_Patch_Command
25.从桌面打开“Cubase_14_Patch_Command”
26.按照终端中的说明进行操作
剧本由Superhero123特别感谢V.R团队撰写。
