VSL正版与XX共存的方法
VSL正版与XX共存的方法，前几天研究了好久R的文档，没搞懂，害的以前买的正版用不了，今天无意中看到一个国外的分享，已经实测，有用。
我自己整理的步骤如下：
1.设置注册表，
HKEY-CURRENT-USER 到SOFTWARE到TEAM R2R到R2RVSL，双击SynchronEnable DumpMode,设置“数值数据”为“1”
2.打开”ILOK“管理器和“Vienna Synchron Player”
3.在“Vienna Synchron Player”中“+”增加正版音色库（如果原来已经加了就不用这一步了）
4.在“Vienna Synchron Player”中点击正版系列中的其中一个或几个“乐器”（或者将鼠标停在乐器上也行），桌面将自动生成一个”VSLEMU Dump“文件夹里面就有”Magic“文件，检查一下文件数量是否跟音色库里的 .syvolume 文件的数量一致，如果不一致，就多点击几个不同乐器，直到数量一致。
5.将生成的”Magic“文件，放入C:\ProgramData\VSL\Vienna Synchron Player\R2R
6.将步骤1中的注册表数值改回到“0”
7.双击“VSLEMU CacheBuilder”，完成解
8.打开就可以了
英文原文：Edit the registry settings so dump mode is set to 1. Then open the player and your Ilok manager so the player can see your licenses are active. You should then open your legit libraries and load each instrument within the library (as the dump will generate magic files for each of them into a folder called VSLEMU Dump on your desktop).
The total number of magic files should equal the amount of .syvolume files in your legit library. If it doesn't you might need to load up articulations within each instrument as some of the released string libraries on here separated things like staccato and spiccato short notes into different .syvolume files.
If the dump folder doesn't appear, try doing it from the VST version rather than the standalone as that was a problem I had (the player I have, although from R2R, seems to behave differently to other posters).
Once you've got all the magic files, change the dump mode back to 0, put the files into the R2R folder in the VSL > VSL Sychron Player folder in Program Data, run the VSLEMU Cache Builder and all the libraries should load in the cracked version.
Cracked versions will not work in legit Synchron Player. You open those with r2r version.
Out of curiosity I Dl'd one of the trials from VSL. Generating the magic files was as easy as written in the pdf. The only detail I would add to the directions is to hover over/click one of the options in the instruments menu. Within a few seconds, the magic files will generate/appear in a folder named 'VSLEMU Dump' on your desktop.
Once you have the 'magic' files, did you...
1) move them to the specified location in the Program Data folder?
2) run the VSLEMU Cachebilder to 'associate' them with other library files?
3) open the library with the r2r version of Synchron Player?
网页直译：编辑注册表设置，将转储模式设置为 1。然后打开播放器和 iLok 管理器，以便播放器能够识别到您的许可证已激活。接下来，您应该打开您的正版音色库，并加载库中的每个乐器（因为转储过程会为每个乐器生成一个 Magic 文件，并将其保存到桌面名为“VSLEMU Dump”的文件夹中）。Magic
文件的总数应该等于正版音色库中 .syvolume 文件的数量。如果不是，您可能需要加载每个乐器中的演奏技巧，因为这里发布的一些弦乐音色库会将断奏和跳弓等短音符分别放在不同的 .syvolume 文件中。
如果转储文件夹没有出现，请尝试使用 VST 版本而不是独立版本，因为我之前也遇到过这个问题（我的播放器虽然是 R2R 的，但似乎与其他用户的操作有所不同）。
收集齐所有魔法文件后，将转储模式改回 0，将文件放入 Program Data 目录下的 VSL > VSL Synorm Player 文件夹中的 R2R 文件夹，运行 VSLEMU Cache Builder，破解版中的所有库应该都会加载。
出于好奇，我从 VSL 下载了一个试用版。生成“魔法文件”的过程和 PDF 文档中描述的一样简单。我唯一要补充的是，将鼠标悬停在乐器菜单中的某个选项上/点击它。几秒钟后，“魔法文件”就会生成/出现在桌面名为“VSLEMU Dump”的文件夹中。
获得“魔法文件”后，你是否：
1) 将它们移动到 Program Data 文件夹中的指定位置？
2) 运行 VSLEMU Cachebilder 将它们与其他库文件关联起来3) 使用r2r 版本的 Synchron Player打开该库？
我自己整理的步骤如下：
1.设置注册表，
HKEY-CURRENT-USER 到SOFTWARE到TEAM R2R到R2RVSL，双击SynchronEnable DumpMode,设置“数值数据”为“1”
2.打开”ILOK“管理器和“Vienna Synchron Player”
3.在“Vienna Synchron Player”中“+”增加正版音色库（如果原来已经加了就不用这一步了）
4.在“Vienna Synchron Player”中点击正版系列中的其中一个或几个“乐器”（或者将鼠标停在乐器上也行），桌面将自动生成一个”VSLEMU Dump“文件夹里面就有”Magic“文件，检查一下文件数量是否跟音色库里的 .syvolume 文件的数量一致，如果不一致，就多点击几个不同乐器，直到数量一致。
5.将生成的”Magic“文件，放入C:\ProgramData\VSL\Vienna Synchron Player\R2R
6.将步骤1中的注册表数值改回到“0”
7.双击“VSLEMU CacheBuilder”，完成解
8.打开就可以了
英文原文：Edit the registry settings so dump mode is set to 1. Then open the player and your Ilok manager so the player can see your licenses are active. You should then open your legit libraries and load each instrument within the library (as the dump will generate magic files for each of them into a folder called VSLEMU Dump on your desktop).
The total number of magic files should equal the amount of .syvolume files in your legit library. If it doesn't you might need to load up articulations within each instrument as some of the released string libraries on here separated things like staccato and spiccato short notes into different .syvolume files.
If the dump folder doesn't appear, try doing it from the VST version rather than the standalone as that was a problem I had (the player I have, although from R2R, seems to behave differently to other posters).
Once you've got all the magic files, change the dump mode back to 0, put the files into the R2R folder in the VSL > VSL Sychron Player folder in Program Data, run the VSLEMU Cache Builder and all the libraries should load in the cracked version.
Cracked versions will not work in legit Synchron Player. You open those with r2r version.
Out of curiosity I Dl'd one of the trials from VSL. Generating the magic files was as easy as written in the pdf. The only detail I would add to the directions is to hover over/click one of the options in the instruments menu. Within a few seconds, the magic files will generate/appear in a folder named 'VSLEMU Dump' on your desktop.
Once you have the 'magic' files, did you...
1) move them to the specified location in the Program Data folder?
2) run the VSLEMU Cachebilder to 'associate' them with other library files?
3) open the library with the r2r version of Synchron Player?
网页直译：编辑注册表设置，将转储模式设置为 1。然后打开播放器和 iLok 管理器，以便播放器能够识别到您的许可证已激活。接下来，您应该打开您的正版音色库，并加载库中的每个乐器（因为转储过程会为每个乐器生成一个 Magic 文件，并将其保存到桌面名为“VSLEMU Dump”的文件夹中）。Magic
文件的总数应该等于正版音色库中 .syvolume 文件的数量。如果不是，您可能需要加载每个乐器中的演奏技巧，因为这里发布的一些弦乐音色库会将断奏和跳弓等短音符分别放在不同的 .syvolume 文件中。
如果转储文件夹没有出现，请尝试使用 VST 版本而不是独立版本，因为我之前也遇到过这个问题（我的播放器虽然是 R2R 的，但似乎与其他用户的操作有所不同）。
收集齐所有魔法文件后，将转储模式改回 0，将文件放入 Program Data 目录下的 VSL > VSL Synorm Player 文件夹中的 R2R 文件夹，运行 VSLEMU Cache Builder，破解版中的所有库应该都会加载。
出于好奇，我从 VSL 下载了一个试用版。生成“魔法文件”的过程和 PDF 文档中描述的一样简单。我唯一要补充的是，将鼠标悬停在乐器菜单中的某个选项上/点击它。几秒钟后，“魔法文件”就会生成/出现在桌面名为“VSLEMU Dump”的文件夹中。
获得“魔法文件”后，你是否：
1) 将它们移动到 Program Data 文件夹中的指定位置？
2) 运行 VSLEMU Cachebilder 将它们与其他库文件关联起来3) 使用r2r 版本的 Synchron Player打开该库？
折腾，哈哈