Tone Empire Reelight Pro v1.0.5
What’s Reelight Pro ?
The invention of digital audio recordings liberated sound engineers in many ways which were not possible in the analog era. Even with all the tools at one’s fingertips, musicians and engineers sorely missed the sound and sonics of earlier recordings.
The magic that the recording mediums imparted by default and one which we all took for granted.
Reelight Pro is a plugin designed to bring back the authentic tape sounds of not one, but 6 different sought Tape Machines at different speeds and levels to bring us even closer to the “reel” sound of tape.
With this plugin, you also get access to desirable parameters such as tape speed, bias, input saturation, crosstalk, and even the compression imparted by tape as separate controls! The plugin comes with a lot of presets designed to help to get you started, or design your own from scratch!
Advanced Dynamic IR
Advanced Dynamic IR (Impulse Response) systems that we have developed in addition to DSP modeling, help us achieve the authentic sound of tape machines like never before.
Hysteresis Processing along with a great sounding resolver, help us achieve the “wow” factor!
Features
I/O Section:
The Input Gain sets levels from -24dB to +24dB with 0 dB in the center, This control acts in the same way as on analog tape recorders, the more gain you increasing, the harder the tape is hit with sound, and create the correct response audible in terms of saturation and compression.
The Lock feature lets a user increase input gain with an automatic gain compensation for an increase in levels in the output.
The Output Gain sets output levels from -24dB to +24dB with 0 dB in the center,
FILTERS
This plugin features a set of 12 dB/ oct (20Hz to 20 kHz)High Pass and Low Pass Filters using an analog design scheme for a natural sound. These are Pre-Filters, and affect the sound before the tape algorithms.
TAPE MACHINE SELECTOR
These selectors labelled A-F , let the user select the different Tape Models
SPEED, BIAS, COMP, CROSSTALK
SPEED: Select Slow or Fast speeds offered per tape machine.. these vary from 3 1/2 ips to 30 ips depending on the machine selected.
BIAS: This control lets you adjust the Bias of the machine selected and creates a desirable saturation effect in addition to Input Gain Saturation.
COMP: This controls the envelope of the sound like a compressor, allowing the user to emulate the “compression” characteristics of tape. The effect is subtle but noticeable.
CROSSTALK: An artifact of multitrack tape machines was “Tape Bleed” or signal bleed, whereas the signal on adjacent tracks also record additionally on each other.. creates a mono-spatial effect. You can adjust the amount desired for this parameter.
OVERSAMPLING
We have the option of 2x-8x oversampling, depending on your cpu power and computer resources, this helps “smooth” the sound and sound even closer to the analog bandwidth.
Tone Empire Reelight Pro v1.0.5
★★【免责声明】★★
☆ 请购买正版，尊重智慧财产权 ☆
☆ 以上内容皆从网上搜集转载，论坛及本人不承担任何版权问题 ☆
☆ 所有软件只作为测试用途，绝不得用作商业盈利或非法用途，否则，一切法律责任皆与论坛及本人无关！ ☆
* 请购买正版最稳定 *
本帖最后由 Mr.魔音哥 于 21-4-28 08:37 编辑
观众反应
