原帖由 lei 于 2006-3-5 11:02 发表
himhui,"没有console, 只有sawstudio"的条件下,如何实现各种硬件效果器与
sawstudio的连接工作呢?音频接口需要如何配置呢?
在以上錄音的情況下, 每個 ADA8000 本身有 8個 PREAMP+PHANTOM POWER MIC IN/有8個模擬輸出 和 SPDIF/ADAT I/O, 最簡單應該是 ADA8000 的 ADAT 輸出 接到聲卡的 ADAT 輸入, 這樣一個 ADAT 接口已可傳送 8 軌24/48的 MONO 訊號。
digiface 的背面
![]()
-------------------------------------------------------------------------------------------------------------------------------
還找來:
Make sure the DigiFace is set as master and set the Behringers to ADAT slave position... a small switch on the back of each unit.
DIGIFACE 要設為 master, ADA8K 設為 SLAVE
The master setting is done in the popup Hammerfall driver dialog (from the taskbar).
[
本帖最后由 himhui 于 2006-3-5 20:13 编辑 ]