看上去改进也颇重要的。既然可以, 当然上马去!
Version 3.8a
Enhancements
* The Dynamics Gate Threshold, Gate Floor and Compressor Threshold waveform display reference lines have been enhanced to track the Input Attenuator control for the channel that is keying the dynamics data. Even though the waveform display itself does not change in regards to the Attenuator control, the reference lines are now properly offset to display the an accurate reference to the full scale waveform data. 增强了在调校 gate 门槛, compressor threshold 门槛时 在音频之事件显示线
* A new option has been added to the FX Choices View Group menu called Set Cur Group As Default. This option displays the current default group and will change it to the currently active group when selected. The default group will be the active group when the program first starts. FX Choices可以分组
Bug Fixes
* Trapped record activation with open record meters not assigned to legitimate input devices.
* Fixed Show Control column lineup of the Filename information in the listbox..
* Stopped the SnapShot Undo command from clearing the EDL Modify flag, so the prompt to save modified sessions would work correctly when changing sessions or exiting the program with un-saved session changes.
* Closing a session now correctly resets the Midi WorkShop default tempo.
* The Control Track Cue Location / PreLoad and Cue Location / Play commands are now correctly accepted as plain Cue Location commands when used following any of the Stop / Cue Next commands.
* The Clr button in the Pre and Pst FX patch views now correctly responds to selected Mixer Channels instead of selected MT Tracks. This is considered a mixer function rather than a MT function. The mouse cursor will now display CHN as the cursor is moved over the Pre and Pst Client top area to reflect the fact that mixer channels are selected.
* Recalling Fx from a memory cell or clearing the current mixer chan will no longer respond incorrectly to selected MT Tracks, causing Fx clearing on those extra tracks.
* Fixed the Library View Right-Click in the Top Client Area to toggle playback, which was broken by the code to toggle Library Lock mode on and off.
* Fixed the Corrupted Region message from falsely popping up during layer copies under certain conditions.
* Adjustments made to keep the SoundFile view from popping up on top of other windows when using the BuildMix To HotTrack function and there is an active soundfile already opened.
* Adjusted code to fix multiple selected tracks layer switching which include video track layers. The video layer, if also selected, will now correctly switch even if your hottrack is one of the selected audio tracks.
Video Track Viewer Version 2.6
* Corrected code to maintain image file lengths after they have been stretched and reloaded..
>---<
Version 3.8
Enhancements
* A new option has been added to the MultiTrack Menu called Record-Mark Display. When this option is active and MultiTrack Record is engaged, each record track will display a growing red mark area designating the actual record region areas. These areas will be replaced by the recorded regions when record is disengaged.
* The File Read routines have been enhanced to accept a full DWORD position rather than the half Signed DWORD position. Max file lengths that can be correctly handled
have now been doubled.
* The MT Load display has been increased in resolution for a more accurate result at very small buffer sizes. The readout display flickering has been smoothed to remain a little more stable between large value shifts.
* A new enhancement has been added to Select Mode moves and copies. If the Control Track is selected, any audio or video selected entry moves or copies will now include all Control Track entries within the range of selected entries from the earliest start position to the latest end position.
* A new enhancement has been added to adjusting MT-Entry boundaries. When using the Alt-Drag or the U-Key methods, adjusting MT-Entry boundaries will now function on all selected tracks, for a quick multiple track manipulation of splice points. Be careful that all selected tracks have associated entry boundaries at the adjustment point, or you may obtain unexpected results on certain tracks.
* A new enhancement has been added to the X-Key softedge crossfade feature. This function will now operate on all selected tracks. Be careful that all selected tracks have associated entry boundaries at the cursor point, or you may obtain unexpected results on certain tracks.
* Live Layer Switching during playback has been extended to the Return and Output Tracks. The new layers must have automation entries in order for the switch to occur.
* The copy layer submenus now display the <> marks to show which layers have data already on them.
* The Drag And Drop Region and Library entries function has been enhanced to properly handle horizontal and vertical scrolling in the MT by using the Right-Hold Horz/Vert Scroll Modes, and zooms.
* The Drag And Drop Region and Library entries function has been enhanced to allow the entry to cut into and insert itself over the top of existing entries at the drop position by Shift-Left-Clicking to drop the entry. If Automation Display Mode is active, current automation entries at the insert position will not be disturbed, otherwise, automation entries at the insert position will be cleared.
* A new feature has been added to the Library Views. Right-Clicking in the Close zone of any Library view window will now toggle Library Lock Mode for that window. Only one Library view window may be locked at a time. If Lock Mode is active, the use of the Insert-Key in the MT when the MT is the active window will now default to inserting the locked Library view currently selected entry, instead of the currently selected region from the Regions view.
* The Build Mix dialog window now responds to the Enter-Key for OK and the Escape
* Device Ins are cleared correctly now when using the Right-Click Set To Default method for Input Channel Sources and Return Channel Sources.
* Corrupt regions with Memory Region Caching that could be caused with SRP Punch-Outs and live inputs have been fixed.
* Fixed code to correctly set patched plugins starting automation when playing back using the Automation View Filter.
* Trapped the Automation View Filter toggle during playback.
* Moving marked automation entries now correctly holds the mark when the screen is scrolled horizontally.
* Moving marked Control Track entries now correctly holds the mark when the screen is scrolled horizontally.
* Slipping a marked track area now correctly holds the mark when the screen is scrolled horizontally.
* Adjusted code in the Echo plugin to correct a possible ClipCursor function call failure in Windows 2K and XP on certain machines which could cause crashes when grabbing a control.
Video Track Viewer Version 2.5
* Trapped for missing audio devices when opening Edit Mode video. The video will now open correctly without a link to the audio device.
* PAL video FireWire capture is now fixed.
[ 本帖最后由 himhui 于 2005-10-18 23:11 编辑 ]
Version 3.8a
Enhancements
* The Dynamics Gate Threshold, Gate Floor and Compressor Threshold waveform display reference lines have been enhanced to track the Input Attenuator control for the channel that is keying the dynamics data. Even though the waveform display itself does not change in regards to the Attenuator control, the reference lines are now properly offset to display the an accurate reference to the full scale waveform data. 增强了在调校 gate 门槛, compressor threshold 门槛时 在音频之事件显示线
* A new option has been added to the FX Choices View Group menu called Set Cur Group As Default. This option displays the current default group and will change it to the currently active group when selected. The default group will be the active group when the program first starts. FX Choices可以分组
Bug Fixes
* Trapped record activation with open record meters not assigned to legitimate input devices.
* Fixed Show Control column lineup of the Filename information in the listbox..
* Stopped the SnapShot Undo command from clearing the EDL Modify flag, so the prompt to save modified sessions would work correctly when changing sessions or exiting the program with un-saved session changes.
* Closing a session now correctly resets the Midi WorkShop default tempo.
* The Control Track Cue Location / PreLoad and Cue Location / Play commands are now correctly accepted as plain Cue Location commands when used following any of the Stop / Cue Next commands.
* The Clr button in the Pre and Pst FX patch views now correctly responds to selected Mixer Channels instead of selected MT Tracks. This is considered a mixer function rather than a MT function. The mouse cursor will now display CHN as the cursor is moved over the Pre and Pst Client top area to reflect the fact that mixer channels are selected.
* Recalling Fx from a memory cell or clearing the current mixer chan will no longer respond incorrectly to selected MT Tracks, causing Fx clearing on those extra tracks.
* Fixed the Library View Right-Click in the Top Client Area to toggle playback, which was broken by the code to toggle Library Lock mode on and off.
* Fixed the Corrupted Region message from falsely popping up during layer copies under certain conditions.
* Adjustments made to keep the SoundFile view from popping up on top of other windows when using the BuildMix To HotTrack function and there is an active soundfile already opened.
* Adjusted code to fix multiple selected tracks layer switching which include video track layers. The video layer, if also selected, will now correctly switch even if your hottrack is one of the selected audio tracks.
Video Track Viewer Version 2.6
* Corrected code to maintain image file lengths after they have been stretched and reloaded..
>---<
Version 3.8
Enhancements
* A new option has been added to the MultiTrack Menu called Record-Mark Display. When this option is active and MultiTrack Record is engaged, each record track will display a growing red mark area designating the actual record region areas. These areas will be replaced by the recorded regions when record is disengaged.
* The File Read routines have been enhanced to accept a full DWORD position rather than the half Signed DWORD position. Max file lengths that can be correctly handled
have now been doubled.
* The MT Load display has been increased in resolution for a more accurate result at very small buffer sizes. The readout display flickering has been smoothed to remain a little more stable between large value shifts.
* A new enhancement has been added to Select Mode moves and copies. If the Control Track is selected, any audio or video selected entry moves or copies will now include all Control Track entries within the range of selected entries from the earliest start position to the latest end position.
* A new enhancement has been added to adjusting MT-Entry boundaries. When using the Alt-Drag or the U-Key methods, adjusting MT-Entry boundaries will now function on all selected tracks, for a quick multiple track manipulation of splice points. Be careful that all selected tracks have associated entry boundaries at the adjustment point, or you may obtain unexpected results on certain tracks.
* A new enhancement has been added to the X-Key softedge crossfade feature. This function will now operate on all selected tracks. Be careful that all selected tracks have associated entry boundaries at the cursor point, or you may obtain unexpected results on certain tracks.
* Live Layer Switching during playback has been extended to the Return and Output Tracks. The new layers must have automation entries in order for the switch to occur.
* The copy layer submenus now display the <> marks to show which layers have data already on them.
* The Drag And Drop Region and Library entries function has been enhanced to properly handle horizontal and vertical scrolling in the MT by using the Right-Hold Horz/Vert Scroll Modes, and zooms.
* The Drag And Drop Region and Library entries function has been enhanced to allow the entry to cut into and insert itself over the top of existing entries at the drop position by Shift-Left-Clicking to drop the entry. If Automation Display Mode is active, current automation entries at the insert position will not be disturbed, otherwise, automation entries at the insert position will be cleared.
* A new feature has been added to the Library Views. Right-Clicking in the Close zone of any Library view window will now toggle Library Lock Mode for that window. Only one Library view window may be locked at a time. If Lock Mode is active, the use of the Insert-Key in the MT when the MT is the active window will now default to inserting the locked Library view currently selected entry, instead of the currently selected region from the Regions view.
* The Build Mix dialog window now responds to the Enter-Key for OK and the Escape
* Device Ins are cleared correctly now when using the Right-Click Set To Default method for Input Channel Sources and Return Channel Sources.
* Corrupt regions with Memory Region Caching that could be caused with SRP Punch-Outs and live inputs have been fixed.
* Fixed code to correctly set patched plugins starting automation when playing back using the Automation View Filter.
* Trapped the Automation View Filter toggle during playback.
* Moving marked automation entries now correctly holds the mark when the screen is scrolled horizontally.
* Moving marked Control Track entries now correctly holds the mark when the screen is scrolled horizontally.
* Slipping a marked track area now correctly holds the mark when the screen is scrolled horizontally.
* Adjusted code in the Echo plugin to correct a possible ClipCursor function call failure in Windows 2K and XP on certain machines which could cause crashes when grabbing a control.
Video Track Viewer Version 2.5
* Trapped for missing audio devices when opening Edit Mode video. The video will now open correctly without a link to the audio device.
* PAL video FireWire capture is now fixed.
[ 本帖最后由 himhui 于 2005-10-18 23:11 编辑 ]
Version 3.7b
Enhancements
Bug Fixes
* Fixed Dynamics Compressor problem that could cause distortion at certain combinations of threshold and ratio settings when using low latency buffer sizes. This fix also delivers more consistency at low latency buffer sizes. 改善因低延迟在 DYNAMIC COMPRESSOR 造成的失真
* Fixed output subgroups from being delayed when live inputs are assigned. 改善因"LIVE INPUT"而造成 SUBGROUP的延迟
Version 3.7
Enhancements
* A new breakthrough in the engine threading technique now allows incredible latency perfromance gains. MME performance with RME Hammerfall cards can now accept 2 x 64 sample buffer settings for awesome latency results. RME Hammerfall 的MME 驱动可在 2 X 64 BUFFER 运行。 This modification should also benefit most other soundcard MME performance depending on driver capabilities. RME ASIO settings will now also function at 1 x 64 on good machines. RME ASIO 驱动可在 1 X 64 BUFFER 运行 *
Enhanced the F-Key restore routines to bypass certain Windows functions that were blocking some of my High Level threads. This results in drastically better performance with less interference at very low latency settings.
* Enhanced live layer switching during playback. New routines offer much higher performance allowing more tracks to switch layers live without buffer overrun problems, even at low latencies. 增强转换 LAYER时的延迟 *
The undo function has been enhanced to now parse for File, Fx, Video and Midi changes and skip these sections if possible. This enhances the recall undo performance considerably when VST synths and many video file filter graphs are part of the session.
* The Return Track Solos have been enhanced to maintain the in-place solo feature while still allowing pre and pst aux send channel information to reach the return bus. Now you may solo Return tracks and hear the blend of all aux send information coming through that track. SOLO" RETURN 轨道"可以只听到插件效果 *
A new option has been added to the File View popup menu called ReFresh Selected Entries PeakData Files. This option will force a peakdata refresh on all selected files. Use this option after first opening an edl file created outside the SAWStudio environment such as one created from the Edl Convert Pro program. In most cases, PeakData files are not created by external SAWStudio edl manipulation programs and will need to be created in SAWStudio in order to see waveform data in the MultiTrack under most zoom conditions.
* A new feature has been added to the Exploded, Zoom and Wide Mixer views. Left-Clicking in any of the non-active areas of the Aux Send section of the modules will popup a list of the Aux Send Labels for reference. You may Left-Click anywhere in the menu to close it. No action will be taken, the list is for reference only.
* A new option has been added to the Mixer menu called Link Mixer V-Offset To F-Keys. When this option is ON, the Exploded Mixer and Zoom Mixer response to F-Keys remains as it has always defaulted in past versions. The vertical offset position along the module is linked and restored with the F-Keys. When this new option is OFF, the vertical offset is ignored when F-Keys are restored and the modules will remain in their current section position, for example, if you are scrolled to the EQ section, now jumping to other F-Key views will leave the Zoom and Exploded Mixers
* Fixed code to send TempoMap Sequential Measure Change info correctly to Fx plugins and the Midi WorkShop.
* Current tempo information is now correctly updated in the Midi WorkShop every time Tempo TimeLine Mode is engaged.
* Fixed crash that could occur under certain conditions when doing video slip and move track operations. Also trapped these operations from creating multiple undo entries when combined with audio tracks.
* HotTrack Solo mode is now switching correctly when using the I, R, and O zones.
* HotTrack Solo mode now correctly clears when closing a session or opening a new session.
>---<
Version 3.6c
Enhancements
* Modified the buffer flush routine for VST plug-ins to improve engine stop time for certain VST plug-ins. Also included the cursor change to the waiting icon while the buffers are flushed.
Bug Fixes
* Fixed code for buildmix operations which use the hi-res SampleRate Conversion routines to stop compatibility interactions with certain patched plug-ins that use the floating point processor. This fixes buildmix operations that would cause maxed-out results in the mix file.
* Blocked Threshold lines from displaying in the MultiTrack View when Automation Mode is active.
* Fixed a small problem that could cause crashes with certain plug-ins when storing active settings to a memory cell.
>---<
Version 3.6b
Enhancements
* Slowed down the mixer settings scrolling adjustment mode to be less sensitive to small mouse changes resulting in an overall feeling of more control.
* The SRP/Rec latch operation has been enhanced to automatically detect a marked area and override the latch function for auto punch-in at the marked area.
Bug Fixes
* Adjusted SRP punch-in code to help eliminate Record Buffer Overruns under certain conditions on certain systems.
>---<
Version 3.6a
Enhancements
Bug Fixes
* Fixed code that was broken by the change in 3.6 to link the video entries to MT entry moves and copies. The problem would show up in as false entry conflict messages and copies to different tracks that were not correctly aligned.
>---<
Version 3.6
Enhancements
* The Input zone on the Record Meters has been enhanced with two new options. Adjust Input Level and Reset Input Level. These options can be used to adjust the actual signal level of the recorded data on the way to the harddrive. Even the level of digital input sources can be adjusted here. Both of these options are available while recording is active or inactive. If you change a record meter to another track by using the popup Track zone, the current input level will be transferred to the new track. If you Shift-Left-Click any record button to clear input assignments back to default, all input levels will be reset also.
* Track and Mixer Chan Labels may be entered now even while playback is active. If Record Meters are open, the engine must be stopped to enter labels due to the already opened and linked record files.
* Pressing the Alt-B-Key or Alt-E-Key will mark an entire MT Entry including its softedges.
* MT Automation Entries will now maintain their relative positions within a Vari-Pitched entry if the VP Factor is later changed.
* A new option has been added to the Options Menu called Auto Record/SRP Latch.
When this option is activated, clicking the SRP button will also latch and engage the Rec button. Pressing the Shift-Key when engaging the SRP button will overrdie this option. When this option is not engaged, the SRP button works independently UNLESS the Shift-Key is also pressed. This option saves with the preferences.
* The BuildMix To Current HotTrack has been enhanced to add the destination track label or track number to the default output files.
* Added Soft Clipping Detection into the Hi-Res SRC algorithm to eliminate wraparound clipping problems when using the Levelizer near max percentages with the Hi-Res SampleRate conversion.
* A new option has been added to the Control Track Options Menu called Output Bypass. When this option is selected, all Control Track output data is suppressed and. the listbox will display as dark gray. The listbox will still chase current entries and can be still be used for Cue Location points.
* Opening a session with an attached Library edl that has pathing problems will now notify you in the warning dialog that the problem is in the Library session as opposed to the main edl session.
* A new option has been added to the Library File Menu called Lock All Library Windows. When this option is activated, closing a session will not clear the current Library windows. You may now open a new session that does not contain Library data and merge the current Library links directly into that new session. If the new session already contains its own Library data links, you will be prompted to clear the lock and load the new data, or not.
* Using Select Mode with video entries has been enhanced. Whenever selected entries include video entries, video and audio will moved together, regardless of which type of entry is grabbed. Both types of entries will contribute to movement limits resulting from bumping into other nearby entries. All movements will be forced to frame boundaries to maintain proper video entry placement.
* Video entries have now been included in the slip track functions, including the all layer slip track function.
Bug Fixes
* Fixed the code to trap certain problems that could occur when opening complex SAWStudio sessions into StudioLite.
* Library Views will no longer clear open Libraries when selecting the Open Edl Library or Open Diectory Of Wav Files prompt if you cancel the operation from the Open File Diaolg.
* Placed a trap into the Control Track Handler that should help eliminate crash problems under certain conditions when stopping directly on a Control Track entry.
* Fixed Crash that could occur under certain conditions when using the Shift-Home-Key function in Select Mode.
* Modified punch-in routine to maintain track sync when recording multiple tracks from virtual console channels as inputs.
Video Track Viewer Version 2.3
* Video Viewer modifications to correct PAL render to fire
[ 本帖最后由 himhui 于 2005-10-18 23:32 编辑 ]
Enhancements
Bug Fixes
* Fixed Dynamics Compressor problem that could cause distortion at certain combinations of threshold and ratio settings when using low latency buffer sizes. This fix also delivers more consistency at low latency buffer sizes. 改善因低延迟在 DYNAMIC COMPRESSOR 造成的失真
* Fixed output subgroups from being delayed when live inputs are assigned. 改善因"LIVE INPUT"而造成 SUBGROUP的延迟
Version 3.7
Enhancements
* A new breakthrough in the engine threading technique now allows incredible latency perfromance gains. MME performance with RME Hammerfall cards can now accept 2 x 64 sample buffer settings for awesome latency results. RME Hammerfall 的MME 驱动可在 2 X 64 BUFFER 运行。 This modification should also benefit most other soundcard MME performance depending on driver capabilities. RME ASIO settings will now also function at 1 x 64 on good machines. RME ASIO 驱动可在 1 X 64 BUFFER 运行 *
Enhanced the F-Key restore routines to bypass certain Windows functions that were blocking some of my High Level threads. This results in drastically better performance with less interference at very low latency settings.
* Enhanced live layer switching during playback. New routines offer much higher performance allowing more tracks to switch layers live without buffer overrun problems, even at low latencies. 增强转换 LAYER时的延迟 *
The undo function has been enhanced to now parse for File, Fx, Video and Midi changes and skip these sections if possible. This enhances the recall undo performance considerably when VST synths and many video file filter graphs are part of the session.
* The Return Track Solos have been enhanced to maintain the in-place solo feature while still allowing pre and pst aux send channel information to reach the return bus. Now you may solo Return tracks and hear the blend of all aux send information coming through that track. SOLO" RETURN 轨道"可以只听到插件效果 *
A new option has been added to the File View popup menu called ReFresh Selected Entries PeakData Files. This option will force a peakdata refresh on all selected files. Use this option after first opening an edl file created outside the SAWStudio environment such as one created from the Edl Convert Pro program. In most cases, PeakData files are not created by external SAWStudio edl manipulation programs and will need to be created in SAWStudio in order to see waveform data in the MultiTrack under most zoom conditions.
* A new feature has been added to the Exploded, Zoom and Wide Mixer views. Left-Clicking in any of the non-active areas of the Aux Send section of the modules will popup a list of the Aux Send Labels for reference. You may Left-Click anywhere in the menu to close it. No action will be taken, the list is for reference only.
* A new option has been added to the Mixer menu called Link Mixer V-Offset To F-Keys. When this option is ON, the Exploded Mixer and Zoom Mixer response to F-Keys remains as it has always defaulted in past versions. The vertical offset position along the module is linked and restored with the F-Keys. When this new option is OFF, the vertical offset is ignored when F-Keys are restored and the modules will remain in their current section position, for example, if you are scrolled to the EQ section, now jumping to other F-Key views will leave the Zoom and Exploded Mixers
* Fixed code to send TempoMap Sequential Measure Change info correctly to Fx plugins and the Midi WorkShop.
* Current tempo information is now correctly updated in the Midi WorkShop every time Tempo TimeLine Mode is engaged.
* Fixed crash that could occur under certain conditions when doing video slip and move track operations. Also trapped these operations from creating multiple undo entries when combined with audio tracks.
* HotTrack Solo mode is now switching correctly when using the I, R, and O zones.
* HotTrack Solo mode now correctly clears when closing a session or opening a new session.
>---<
Version 3.6c
Enhancements
* Modified the buffer flush routine for VST plug-ins to improve engine stop time for certain VST plug-ins. Also included the cursor change to the waiting icon while the buffers are flushed.
Bug Fixes
* Fixed code for buildmix operations which use the hi-res SampleRate Conversion routines to stop compatibility interactions with certain patched plug-ins that use the floating point processor. This fixes buildmix operations that would cause maxed-out results in the mix file.
* Blocked Threshold lines from displaying in the MultiTrack View when Automation Mode is active.
* Fixed a small problem that could cause crashes with certain plug-ins when storing active settings to a memory cell.
>---<
Version 3.6b
Enhancements
* Slowed down the mixer settings scrolling adjustment mode to be less sensitive to small mouse changes resulting in an overall feeling of more control.
* The SRP/Rec latch operation has been enhanced to automatically detect a marked area and override the latch function for auto punch-in at the marked area.
Bug Fixes
* Adjusted SRP punch-in code to help eliminate Record Buffer Overruns under certain conditions on certain systems.
>---<
Version 3.6a
Enhancements
Bug Fixes
* Fixed code that was broken by the change in 3.6 to link the video entries to MT entry moves and copies. The problem would show up in as false entry conflict messages and copies to different tracks that were not correctly aligned.
>---<
Version 3.6
Enhancements
* The Input zone on the Record Meters has been enhanced with two new options. Adjust Input Level and Reset Input Level. These options can be used to adjust the actual signal level of the recorded data on the way to the harddrive. Even the level of digital input sources can be adjusted here. Both of these options are available while recording is active or inactive. If you change a record meter to another track by using the popup Track zone, the current input level will be transferred to the new track. If you Shift-Left-Click any record button to clear input assignments back to default, all input levels will be reset also.
* Track and Mixer Chan Labels may be entered now even while playback is active. If Record Meters are open, the engine must be stopped to enter labels due to the already opened and linked record files.
* Pressing the Alt-B-Key or Alt-E-Key will mark an entire MT Entry including its softedges.
* MT Automation Entries will now maintain their relative positions within a Vari-Pitched entry if the VP Factor is later changed.
* A new option has been added to the Options Menu called Auto Record/SRP Latch.
When this option is activated, clicking the SRP button will also latch and engage the Rec button. Pressing the Shift-Key when engaging the SRP button will overrdie this option. When this option is not engaged, the SRP button works independently UNLESS the Shift-Key is also pressed. This option saves with the preferences.
* The BuildMix To Current HotTrack has been enhanced to add the destination track label or track number to the default output files.
* Added Soft Clipping Detection into the Hi-Res SRC algorithm to eliminate wraparound clipping problems when using the Levelizer near max percentages with the Hi-Res SampleRate conversion.
* A new option has been added to the Control Track Options Menu called Output Bypass. When this option is selected, all Control Track output data is suppressed and. the listbox will display as dark gray. The listbox will still chase current entries and can be still be used for Cue Location points.
* Opening a session with an attached Library edl that has pathing problems will now notify you in the warning dialog that the problem is in the Library session as opposed to the main edl session.
* A new option has been added to the Library File Menu called Lock All Library Windows. When this option is activated, closing a session will not clear the current Library windows. You may now open a new session that does not contain Library data and merge the current Library links directly into that new session. If the new session already contains its own Library data links, you will be prompted to clear the lock and load the new data, or not.
* Using Select Mode with video entries has been enhanced. Whenever selected entries include video entries, video and audio will moved together, regardless of which type of entry is grabbed. Both types of entries will contribute to movement limits resulting from bumping into other nearby entries. All movements will be forced to frame boundaries to maintain proper video entry placement.
* Video entries have now been included in the slip track functions, including the all layer slip track function.
Bug Fixes
* Fixed the code to trap certain problems that could occur when opening complex SAWStudio sessions into StudioLite.
* Library Views will no longer clear open Libraries when selecting the Open Edl Library or Open Diectory Of Wav Files prompt if you cancel the operation from the Open File Diaolg.
* Placed a trap into the Control Track Handler that should help eliminate crash problems under certain conditions when stopping directly on a Control Track entry.
* Fixed Crash that could occur under certain conditions when using the Shift-Home-Key function in Select Mode.
* Modified punch-in routine to maintain track sync when recording multiple tracks from virtual console channels as inputs.
Video Track Viewer Version 2.3
* Video Viewer modifications to correct PAL render to fire
[ 本帖最后由 himhui 于 2005-10-18 23:32 编辑 ]