Sawstudio

看上去很不錯..


[ 本帖最后由 himhui 于 12-11-4 11:56 编辑 ]

哪有卖的？

你猜···哈哈！！

关键是多少钱呢。。

原聲
http://www.gearslutz.com/board/attachments/high-end/245313d1310973635-magnetec-pultec-unprocessed-source.wav

Puigtec EQP1A
http://www.gearslutz.com/board/attachments/high-end/245314d1310973635-magnetec-pultec-puigtec-eqp1a.wav

PulseTec
http://www.gearslutz.com/board/attachments/high-end/245315d1310973635-magnetec-pultec-pulsetec.wav

Tube-Tech PE 1C
http://www.gearslutz.com/board/attachments/high-end/245316d1310973635-magnetec-pultec-tube-tech-pe-1c.wav

FatBustard EQ
http://www.gearslutz.com/board/attachments/high-end/245317d1310973635-magnetec-pultec-fatbustard-eq.wav

Magnetone EQP1A
http://www.gearslutz.com/board/attachments/high-end/245318d1310973635-magnetec-pultec-magnetone-eqp1a.wav

[ 本帖最后由 himhui 于 12-11-4 13:17 编辑 ]

diy的，，电子管的安置很坑爹

这东西看上去不错！

還看到有個英國人和澳洲人也買了一雙...


As for sound, they sound great. Certainly blows away any plugins. The other EQ I had recently was a Chandler Germanium Tone Control. That turned out to be useless. Had to be repaired three times. Inductor kept going until I demanded that the cost was used against something else I needed. Never again will I buy Chandler. So as comparison to Chandler, leaving aside the problems with the Chandler, the Magnetecs are better in my opinion. Different because the Chandler had more colour from the Germanium transistors. The Magnetecs seem full sounding and very smooth. I can't compare to a real Pulteq but I think the Magnetecs are a no brainer buy.

                    




[ 本帖最后由 himhui 于 12-11-4 15:41 编辑 ]

这个EQ很顺滑，我买的1000多的国产前级上有个，很好用，可惜就是控制少点。如果国内diy界多弄些录音电子管设备，价格会非常便宜

看着不错  不知道价格咋样

不會吧,  国产前级上有个PULTEC.....而且只是1000RMB......  , 單是買材料也要 1000多美元了.........
應該只是樣子有點像吧......

哈哈，EQ这东西，电路对了，声音就差不多。国产的优点是用的材料不错，缺点是管子低端（30多块的），把管子一换（我换了德根和金狮的），EQ部分一改（改成录音用的频率和频宽），输入输出加个牛，好声音立即出来了

也想问问哪里有卖？价钱几何？谢谢！

真的這樣簡單.....?  

别吹牛哈，就一个变压器弄死你，嘎嘎。