合成器/采样器/音源/音色

这个问题我一直没有解决，mac版kontakt604，用560入库，死活打不开音色。有经验的兄弟们帮帮帮忙，谢谢。

试试从 Manage Libraries

这是一套标准音色库，别乱用入库工具。

入正，完美解决。

嗯，另外一台imac一点问题没有，在mbp上就这样。奇了怪了，一样的玩意。

我的chris hein ensemble strings同样问题，求高手指点

        

好的谢谢，我去试试。

学习学习

下了升级文件，替换了文件。但是入库后604里面不显示。后来参考了一下入库说明，把说明里提到的两个文件的SNPID号码修改成一致就好了，604里面成功显示，打开也不报错了，谢谢了。

How to add libraries to this version of Kontakt:
You have to open the Kontakt 5.6.0 standalone app (or 5.6.5) and add the library in it. If the library doesn't appear on the left panel, don't worry about it. Just close the app.
Open this new Kontakt 6 version, and if you can't see that library there, then you have to do the following steps (in case there is a .nicnt file in the library's folder) but first close Kontakt, then:
1. check the SNPID number of the library, go to the folder of the library and open the .nicnt file (with TextEdit or any similar program), you will find a line like this:
P74
(in this case P74 was the ID code of Metropolis Ark 3)
2. go to your hard drive > Library > Application Support > Native Instruments > Service Center, and look for the .xml file with the name of that desired library, open it with TextEdit and you will see that the SNPID number there is 000 which indicates that Kontakt somehow hasn't been able to add it properly. Change that three zeros with the ID code you found in the .nicnt of that library, then save and close TextEdit. And you're ready to use the library in the new Kontakt.
During this process Kontakt app should not be opened!
You can get 5.6.0 standalone app from previous releases (for example 5.7.3 from here).
If you encounter the problem where Kontakt prompts you after you try to load the instrument that "This instrument belongs to a library that is currently not installed", in this case delete the library's .xml file from:
your_hard_drive > Library > Application Support > Native Instruments > Service Center
And also delete the com.native-instruments.{library's name}.plist file from:
your_hard_drive > Library > Preferences
Then try to add the library again in Kontakt 5.6.0 and follow the SNPID workaround from above again.
If you can't open Kontakt 5.6.0 app, use Permissions Reset app to reset it.

哦，解决了就好，我的是win版的，可能不一样

大佬分享被百度取消了，能再分享一次吗，特别需要~谢谢了！！

链接: https://pan.baidu.com/s/1mBx925f33_w-CmnewZlxaw 提取码: n8xk 复制这段内容后打开百度网盘手机App，操作更方便哦

大佬 又失效了 能再发一次嘛

麻烦能不能再发一次