升级到 3a 版。修改了好多错误。
试用版下载：
http://www.ultrafunk.com/products/downloads/sonitus_r3.exe
--------------
Sonitus:fx release 3a update (05-July-2002)
VST plug-in delay compensation for the fx:compressor, fx:gate and fx:multiband plug-ins
To be able to change the plug-ins delay compensation while the plug-in is running, you have to set the limiter on/off or the lookahead in the gate to the desired value, then turn the plug-in off and then on again to get the correct compensation.
All plug-ins:
VST & DX: Some controls were not drawn correctly in Cubase SX the first time the GUI was opened and the "Always on top" option was enabled
The installer now shows a more understandable message when the preset files are about to be installed, making it much easier to avoid overwriting your plug-in preset files if you have changed them
fx:compressor
VST: Dynamically adjustable plug-in delay compensation now works in host applications that supports it
fx:delay
DX: Did not process 16 bit (caused problems in CEP 2.0)
fx:equalizer
VST: Bypass is sometimes on when a plug-in is loaded, and when this happens it cannot be disabled
VST & DX: L+R peak meters range was set to 30dB instead of 60dB
fx:gate
VST & DX: CPU denormalization (CPU spike) bug on Intel P4 CPUs
DX: Level and Tune edit controls were not grayed out when the plug-in GUI was opened in Wavelab
VST: Dynamically adjustable plug-in delay compensation now works in host applications that supports it
fx:modulator
VST & DX: CPU denormalization (CPU spike) bug on Intel P4 CPUs (Flanger and Ensemble mode).
fx:multiband
VST: Dynamically adjustable plug-in delay compensation now works in host applications that supports it
fx:phase
DX: Did not process 16 bit(caused problems in CEP 2.0)
fx:reverb
VST & DX: L+R peak meters range was set to 30dB instead of 60dB
VST: Did not work correctly when used with 96kHz sample rate
DX: Did not process 16 bit(caused problems in CEP 2.0)
fx:surround
DX: Did not process 16 bit(caused problems in CEP 2.0)
VST: Automating a path or point outside of the Zoom Factor 1 setting did not work properly
fx:wahwah
VST & DX: CPU denormalization (CPU spike) bug on Intel P4 CPUs (Triggered mode).
Added L+R peak dB text readout above the output peak LEDs