怎么叫支持?XP底下有ASIO,98底下看这些,
CWPA 8.0:
Go to Tools | Audio Hardware.
In the Audio Hardware dialog, select "Windows Sound Cards (DirectShow 5.1)." DO NOT select "Digidesign AudioMedia 3" or "Digidesign Session 8."
Go to Tools | Audio Options.
In the Audio Options dialog, select the Drivers tab.
"Digidesign Digi-001: Chan 1-2" should be enabled for both input and output drivers.
Select the General tab.
"Digidesign Digi-001: Chan 1-2" should be set for the Playback and Record Timing Masters.
Select the Advanced tab.
"Enable Simultaneous Record/Playback" should be checked.
"Use Wave Out Position for Timing" should be checked.
"Use unpacked 32-bit storage for > 16-bit audio" should NOT be checked.
Set Wave queue buffers = 4 and Wave buffer size = 100KB. More buffers or a larger buffer size may allow you to have more tracks in your session. We get 8 tracks of 24-bit audio with this setting.
Press OK to close the dialog and save your settings.
CWPA 9.0:
If you are installing CWPA 9.0 after CWPA 8.0, we recommend removing 8.0 first rather than installing 9.0 over it. In our internal testing, installing 9.0 over 8.0 resulted in a maximum audio track count of 2 (!). If we uninstalled 8.0 before installing 9.0, we could play as many as 8 24-bit tracks. We do not know the cause of this difference in performance but we do know that uninstalling 8.0 first fixed it.
Go to Options | Audio and select the Drivers tab.
"Digidesign Digi-001: Chan 1-2" should be enabled for both input and output drivers.
Select the General tab.
"Digidesign Digi-001: Chan 1-2" should be set for the Playback and Record Timing Masters.
You will have to experiment with "[Number of] Buffers in Playback Queue" and "Buffer Size" to find the best settings for your system configuration.
Select the Advanced tab.
"Simultaneous Record/Playback" should be checked.
"Stop On Driver Underrun" should be probably be checked. See Cakewalk help for more details.
"WavePipe(tm) Acceleration" should NOT be checked. Cakewalk's WavePipe technology is not compatible with the Digi-001 driver.
"Unpack >16 bit audio" should NOT be checked.
"Left-justify unpacked data" should NOT be checked.
Select the Device Profiles tab and select the "Digidesign Digi-001: Chan 1-2" profile.
"Use Wave Out Position for Timing" should be checked.
Press OK to close the dialog and save your settings.
Cakewalk 8.0 hangs or crashes when you record enable an audio track (more likely) or press Play or Record (less likely)
Description
Cakewalk may hang or crash if you record enable an audio track or press Play/Record in one of the following situations:
(1) The WaveDriver Settings Dialog is open.
(2) You are recording, record monitoring, or playing audio in another application.
(3) When using another audio application such as Acid or Cubase VST that has an option to keep the wavedriver "open" even when you are not playing or recording.
Solution / Workaround
Before playing, recording, or record enabling in Cakewalk,
(1) Close the WaveDriver Settings Dialog.
(2) Stop recording, record monitoring, or playing audio in all other applications.
(3) You must either turn off the "always keep the wavedriver open" setting in other apps or close the applications in which this setting is enabled.
