BeatSkillz SampleX v1.1.0 Regged (WIN OSX)-RET
Team RET | 11 Aug 2020 | WiN: 24.2MB | OSX: 87.5MB | UPLOADER: JCHEN: DECiBELLE
SampleX brings you accurately modeled vintage sampler emulation. Dial-in the sample rate, bit rate, aliasing, input drive and filter settings to sound like any sampler, or design your own! Multiple sampler emulation presets already included.
In today’s advanced age of music tools that seek the “cleanest”, most “perfect” sounds, there has suddenly been a desire for the “Gritty” sounds of the machines of the past.
Once such quest has been the acquisition of old, primitive samplers and sample drum machines like the EMU SP1200, AKAI s900/950, and others. This has increased the rate of these machines to 10s of thousands of dollars.
The sound that producers and artists seek in these boxes is usually the low bit rates and sample rates resulting in an “aliased” sound or “artifacts” as we now call them. These limitations of the vintage machines have now become very desired and sought after sound. Just sample rate reduction and “Bit crushers” have yet to actually sound like old machines.
Our team at Beatskillz went on a quest to study the actual circuitry and found each and every step right from the A/D converters, preamps, analog and digital filters and processes involved to recreate each stage and bring you a plugin that can not only emulate a sampler but many, and also lets you design your own sampler or vintage chip!
The Sample Rate Interpolation system that we have built in DSP, lets you dial in any sample rate from 96 kHz to 2 kHz. You can also ” type ” in the values!
We have also done a very accurate emulation of a well-known Ladder Filter with Resonance, this gets you the “Warm” Filter sound of a very desired analog synth. We have also carefully emulated the input drive of the S900 to give you all the parameters needed for multiple variations of the sound!
v1.1 - 06 June 2020
1. Now the knobs will rotate with a linear action
2. Fixed dry/wet issue.
https://www.beatskillz.com/samplex/
本帖最后由 jchenflute 于 20-8-12 01:20 编辑
SampleX brings you accurately modeled vintage sampler emulation. Dial-in the sample rate, bit rate, aliasing, input drive and filter settings to sound like any sampler, or design your own! Multiple sampler emulation presets already included.
In today’s advanced age of music tools that seek the “cleanest”, most “perfect” sounds, there has suddenly been a desire for the “Gritty” sounds of the machines of the past.
Once such quest has been the acquisition of old, primitive samplers and sample drum machines like the EMU SP1200, AKAI s900/950, and others. This has increased the rate of these machines to 10s of thousands of dollars.
The sound that producers and artists seek in these boxes is usually the low bit rates and sample rates resulting in an “aliased” sound or “artifacts” as we now call them. These limitations of the vintage machines have now become very desired and sought after sound. Just sample rate reduction and “Bit crushers” have yet to actually sound like old machines.
Our team at Beatskillz went on a quest to study the actual circuitry and found each and every step right from the A/D converters, preamps, analog and digital filters and processes involved to recreate each stage and bring you a plugin that can not only emulate a sampler but many, and also lets you design your own sampler or vintage chip!
The Sample Rate Interpolation system that we have built in DSP, lets you dial in any sample rate from 96 kHz to 2 kHz. You can also ” type ” in the values!
We have also done a very accurate emulation of a well-known Ladder Filter with Resonance, this gets you the “Warm” Filter sound of a very desired analog synth. We have also carefully emulated the input drive of the S900 to give you all the parameters needed for multiple variations of the sound!
v1.1 - 06 June 2020
1. Now the knobs will rotate with a linear action
2. Fixed dry/wet issue.
https://www.beatskillz.com/samplex/
本帖最后由 jchenflute 于 20-8-12 01:20 编辑
lsx123 发表于 20-8-12 10:49
是什么插件老师? 谢谢！
SampleX为您带来精确建模的复古采样器仿真。拨入采样率，比特率，混叠，输入驱动器和过滤器设置听起来像任何采样器，或设计你自己的！已包含多个采样器仿真预设。
在当今音乐工具追求“最干净、最完美”的时代，人们突然对过去机器的“坚韧”声音产生了渴望。
曾经这样的追求是购买旧的，原始的采样器和样品滚筒机器，如EMU SP1200、AKAI s900/950等。这使这些机器的价格提高到了10万美元。
制作者和艺术家在这些盒子里寻找的声音通常是低比特率和低采样率，这导致了我们现在称之为“锯齿”声音或“人工制品”。老式机器的这些局限性现在已经成为人们非常渴望和追求的声音。仅仅是降低采样率和“钻头破碎机”听起来还不像旧机器。
我们在Beatskillz的团队继续研究实际的电路，发现了从a/D转换器、前置放大器、模拟和数字滤波器到每个阶段的每一步，并为您带来了一个插件，不仅可以模拟采样器，而且可以让您设计自己的采样器或老式芯片！
我们在DSP中内置的采样率插值系统，允许您拨入96 kHz到2 kHz的任何采样率。您也可以在值中“键入”！
我们还做了一个非常精确的仿真，一个著名的阶梯滤波器共振，这让你得到“温暖”滤波器的声音非常理想的模拟合成器。我们还仔细模拟了S900的输入驱动器，为您提供了多种声音变化所需的所有参数！