AD Restoration Suite v1.8.0 WiN MAC(更新）
本帖最后由 navy 于 17-4-22 23:43 编辑
![]()
AD Restoration Suite v1.8.0 WiN MACTeam R2R | 19 Apr 2017 | OSX: 88.5 MB | WiN: 19.7 MB
Restoration Suite consists of four audio restoration and noise reduction plug-ins that are the result of several years of research within the field of noise reduction and audio restoration algorithms…
Contents:
- DeNoise is a plug-in designed to reduce stationary noise, such as broadband noise, hiss, wind noise, buzz and camera noise. Great efforts have been put into preserving as much of the original signal as possible during the noise reduction process. As a result, DeNoise can reduce or in many cases completely remove the noise in a very transparent manner without loss of transients, attacks or “air” in the recording.
- DeHum targets hum and buzz typically introduced by poorly grounded electrical equipment, but also other tonal noise sources like electrical motor noise.
- DeClick is designed to remove impulsive noise such as clicks, crackle, plosives and thumps. These distortions are frequently encountered on LP and 78 RPM records, but also occur in digital recordings when recording voice without pop shield or due to drop-outs or distorted data packets.
- DeClip restores audio recordings distorted by analog or digital clipping.
CHANGELOG:
We have released an update of our Restoration Suite. The update is free for all current Restoration Suite owners. The focus in version 1.8 is DeNoise which has received several quality improvements. A new soft knee parameter allows for more natural transitions between noise and the wanted signal. It is in most situations desirable to leave a certain noise floor in the restored signal and it is easier to achieve a natural sounding residual noise with the new update.
We have released an update of our Restoration Suite. The update is free for all current Restoration Suite owners. The focus in version 1.8 is DeNoise which has received several quality improvements. A new soft knee parameter allows for more natural transitions between noise and the wanted signal. It is in most situations desirable to leave a certain noise floor in the restored signal and it is easier to achieve a natural sounding residual noise with the new update.
Furthermore, the attack and release times are now adaptive and automatically adjusted according to the input material. The controls are still there, but these are now representing the maximum attack and release times. The noise profile estimation in the adaptive broadband noise mode is now capable of a better discrimination between noise and the wanted signal.
Restoration Suite is available in 32 and 64 bit versions, as VST or AAX for both Windows and OS X or as AU plug-ins for OS X.
http://www.audiobar.net/forum.php?mod=viewthread&tid=495969&highlight=Restoration
http://www.audiobar.net/forum.php?mod=viewthread&tid=408302&highlight=Restoration
WIN：链接：https：//pan.baidu.com/s/1pKUvVnX密码：m72e
MAC：链接: https://pan.baidu.com/s/1skCaVcp 密码: 9rn5
观众反应
