先升级最新的固件1.2.1
https://www.roland.com/global/su ... -a75b-1b5fe3963cc2/
控制integra-7有两个方法，一个是通过roland 官方插件，有一个au的版本，可以控制。还有一个是非官方的日本人做的一个免费控制程序，两个平台上都有，你可以试试哪个更顺手。
所有都在这里
https://www.roland.com/global/products/integra-7/downloads/
官方
https://www.roland.com/global/su ... -9306-f383df5ccd0d/
这个是可以在logic 下面运行的。
民间
https://synth-voice.sakura.ne.jp ... Editor_english.html
https://www.roland.com/global/su ... -a75b-1b5fe3963cc2/
控制integra-7有两个方法，一个是通过roland 官方插件，有一个au的版本，可以控制。还有一个是非官方的日本人做的一个免费控制程序，两个平台上都有，你可以试试哪个更顺手。
所有都在这里
https://www.roland.com/global/products/integra-7/downloads/
官方
https://www.roland.com/global/su ... -9306-f383df5ccd0d/
这个是可以在logic 下面运行的。
民间
https://synth-voice.sakura.ne.jp ... Editor_english.html
JazzCat 发表于 18-7-21 20:23
这个只能当一个控制器用，再新建16轨 midi 。
这个vst里面选中 utility 里面 midi in out 都选 integra ...
这里怎么设置呢 弄不响啊
本帖最后由 JazzCat 于 18-7-22 22:38 编辑
你可以看看软件的说明，上面有很简单的设定。
你可以看看软件的说明，上面有很简单的设定。
Once you have connected your Integra-7 to a computer, you may want to use the Roland Version 2 Editor to select sounds and program the Integra-7. This application is a VST3 plugin, so any changes you make in the editor are then saved in your song on the computer.
You can download the latest version of the Integra-7 editor here.
Once you have downloaded and installed the editor, you will need to launch it as a VST instrument within your DAW. You then need to make the following settings to allow it to connect to the Integra-7 correctly:
- Launch the Integra-7 V2 Editor.
- Press the "UTILITY" button in the upper right hand corner of the editor screen.
- Press the "DEVICE" option on the left hand side of the editor screen.
- Select "INTEGRA-7 CTRL" for both the "Input Device" and the "Output Device" then press OK.
- Press the "READ" button in the upper right hand corner of the editor screen to synchronize the editor with the Integra-7 settings. This should take 15-20 seconds and the editor will then have the current settings in your Integra-7 loaded, and you can use it to select and edit sounds in the module.