Pro Tools

請問各位老師, 小弟新來的, 有些問題請教.
  如果我上在pro tools 上用 Dynamic Processor (硬件) ,是否比 plug-in (軟件) 較好?
如何接上? 是否用insert 的方式?

1.
Mic ---> Preamp --->  Compressor ---> 002r  (這樣是否正確?)

2.
Mic ---> Preamp ---> 002r .( 可否用insert 接 Compressor)?

請教 請教

[:smilie:]12.gif[/:smilie:]

我的使用經驗是硬件的Compressor會比軟件的Compressor好用多,
畢竟經過軟件的運算會增加一些延時,更重要的是錄音時的Dynamic headroom,
軟件的動態承受能力明顯沒有硬件來得強!!

謝! 頭哥經驗

我的是 MAC + Digi 002r + TubrPre

請問Compressor 應放在那兒, 錄音前 or 錄音後 ?
錄音後的話, 如何接上 002r?

有沒有好的Compressor 推薦,
Comp16 好嗎?  or Alesis 3630 Compressor ?

[:smilie:]05.gif[/:smilie:]

标准的Mic Preamp都自带Compressor，如果没有的话，将Compressor 穿在Mic后面。
Insert也行，但是接线有点麻烦.
(Stereo Jack only, TRS: Tip =>Send ; Ring<=Return; Sleeve=GND)

关于用软件压缩器好还是硬件压缩器好，我觉得没有必要分的太仔细。
有人喜欢硬的，操纵起来舒适; 有人喜欢软的，省钱又简洁。。。
我能，软硬通吃
[:smilie:]01ha.gif[/:smilie:]

将Compressor 穿在Mic后面。

是否 Mic ----> Compressor ----> Preamp ?

如何 insert ? 用的是 002R .

謝謝!

是否 Mic ----> Compressor ----> Preamp ?

千萬別用這種線路,這樣出去會被笑的!! [:smilie:]01ha.gif[/:smilie:]

002/002R都没有Insert功能，因为它是与ProTools一起使用的。通过ProTools界面，你可以在
每个通道插入和发送多达5路的信号。用Compressor的目的主要是在话筒拾音时能保持良好的动态范围，对音源的增益起自动控制，通常用来对高电平信号进行自动衰减。由于MIC拾起的信号是非常低的，如果不进行放大将不能正常工作，也没有必要Compressor。所以MIC后面必须接话放，当然，如果你的Compressor带有话放的功能就不用Preamp了。
为了不被笑话，告诉我你的Compressor和PreAmp自带有哪些功能，还有牌子与型号
[:smilie:]30cool.gif[/:smilie:]

我正在考慮買那個好? 所以想多了解..  >> Mac G5  + Digi 002r   + Mic (shure KSM 27)
還未購preamp ..
聽人說 Presonus TubePre 很好又平! 但好像沒有Compressor . 如果加 Presonus Comp16 可以嗎?
Fat2 會比 TubePre 好多少? or focusrite..
價錢想在 $4,000 元 左右.. [:smilie:]05.gif[/:smilie:]

不要考虑的那么复杂，便宜没有好货
[:smilie:]01ha.gif[/:smilie:]

如果是我就买Focusrite 的Preamp，它是大家公认的顶级话放，并且带有Compressor哦。

另外，更重要的是-有我这样的人为你做免费的提供技术支援

顶级的Focusrite Preamp 當然好, 但我想價格在 3,000 - 4,000 之間, Focusrite 有嗎? 是否會好過 FAT2 等 Tube Preamp ?  [:smilie:]15.gif[/:smilie:]

Focusrite Penta
Stereo Optical Compressor / Mic/Instrument Preamplifier.
$399.97
Features:

Class A mic/line/instrument preamp with phantom power and high-pass filter
Mic input is provided via a front panel XLR and the instrument input via a 1/4" TRS jack
Optical compressor with bypass control and the ability to change signal flow post EQ
Focusrite Tube Sound technology emulates the sonic characteristics of tube devices
Newly designed 3-band EQ with switched presets, optimized for either vocal or instrumental tracks. The EQ section includes its own bypass control
LED metering displays are provided for preamp signal presence and clip, compressor gain reduction and output levels
Line level inputs/outputs on rear panel that can operate at +4 dBu or -10 dBV
1U, 19" rack mount chassis.
Optional 24-bit, 96kHz A/D card with S/PDIF output and BNC Word Clock connector for external sync

**********************
Focusrite Trak Master
$399.97
+ FREE Shipping
Features:

Class A mic/line/instrument preamp with phantom power and high-pass filter
Mic input is provided via a front panel XLR and the instrument input via a 1/4" TRS jack
Optical compressor with bypass control and the ability to change signal flow post EQ
Focusrite Tube Sound technology emulates the sonic characteristics of tube devices
Newly designed 3-band EQ with switched presets, optimized for either vocal or instrumental tracks. The EQ section includes its own bypass control
LED metering displays are provided for preamp signal presence and clip, compressor gain reduction and output levels
Line level inputs/outputs on rear panel that can operate at +4 dBu or -10 dBV
1U, 19" rack mount chassis.
Optional 24-bit, 96kHz A/D card with S/PDIF output and BNC Word Clock connector for external sync

+ FREE Shipping

What different between Trak master and Penta . It seems the same. is the Penta 2u ? [:smilie:]12.gif[/:smilie:]

Right, by the apperance, the Penta is a standard 2U type, while the TrakMaster is a standard 1U type. What a special for Penta is that it preseted 16 compressor mode for beginner.

Here is the TrakMaster