- 第 1 页 -
回复 希布 的帖子
EQ HI，EQ LO是高切和低切吗？HELP里面说他还可以配合其他的功能做特殊的处理是做什么 ...
http://www.audiobar.net/viewthread.php?tid=124025&highlight=de-ESSER
英文也不好！```非文比较好！``![]()
看了下HELP和走了趟本版迷宫终于找回小小安全感了````
我想说的是SAWSTUDIO的闪避真轻松，喔偷尾唇太绝了！`````![]()
谦虚老师无声仿有声的启发绝技太受用！```招招到要害！```在此敬谢！~`![]()
维独有两个功能GOOGLE在线翻译翻译成非文“不佬渡奶”之类的没办法猜测```
Remove Silence (Split/Mark)
This option operates on the current Levelizer track, using the current Gate settings to actually Split and
Mark Regions at each Threshold crossing point. The splits are created according to the following rules:
?Audio sections below the Threshold are split and marked for removal. The split point is set at the end of the Release cycle.
?Audio sections above the Threshold are split and unmarked for keeping. The split point is set in front of the actual Threshold
crossing point by the amount equal to the Attack time.
?If SAW's Auto Zero Cross Detection option is active, each split point is adjusted to the nearest zero cross, creating extremely
clean and quiet Region boundaries.
Activating this option causes a pre-scan starting from the MultiTrack cursor position to the end of the track, or from the
beginning to the end of a marked area. At the end of the pre-scan, the Regions are created, leaving you in Select Mode to view the
results. If all looks well, a simple press of the Delete key will remove the silence areas.
If you decide to change your mind, use the Undo EDL option on the Levelizer, and you will be instantly returned to your previous
condition, ready to adjust the settings and try again.
Remove Silence (Automatic)
This option operates on the current Levelizer track, using the current Gate settings to actually Split and
Remove Regions at each Threshold crossing point. The splits are created according to the following rules:
?Audio sections below the Threshold are split and removed. The split point is set at the end of the Release cycle.
?Audio sections above the Threshold are split and kept. The split point is set in front of the actual Threshold crossing point by
the amount equal to the Attack time.
?If SAW's Auto Zero Cross Detection option is active, each split point is adjusted to the nearest zero cross, creating extremely
clean and quiet Region boundaries.
Activating this option causes a pre-scan starting from the MultiTrack cursor position to the end of the track, or from the
beginning to the end of a marked area. At the end of the pre-scan, the Regions are created, removing the silence areas.
If you decide to change your mind, use the Undo EDL option on the Levelizer, and you will be instantly returned to your previous
condition, ready to adjust the settings and try again.
看了下HELP和走了趟本版迷宫终于找回小小安全感了````
我想说的是SAWSTUDIO的闪避真轻松，喔偷尾唇太绝了！`````
谦虚老师无声仿有声的启发绝技太受用！```招招到要害！```在此敬谢！~`
维独有两个功能GOOGLE在线翻译翻译成非文“不佬渡奶”之类的没办法猜测```
Remove Silence (Split/Mark)
This option operates on the current Levelizer track, using the current Gate settings to actually Split and
Mark Regions at each Threshold crossing point. The splits are created according to the following rules:
?Audio sections below the Threshold are split and marked for removal. The split point is set at the end of the Release cycle.
?Audio sections above the Threshold are split and unmarked for keeping. The split point is set in front of the actual Threshold
crossing point by the amount equal to the Attack time.
?If SAW's Auto Zero Cross Detection option is active, each split point is adjusted to the nearest zero cross, creating extremely
clean and quiet Region boundaries.
Activating this option causes a pre-scan starting from the MultiTrack cursor position to the end of the track, or from the
beginning to the end of a marked area. At the end of the pre-scan, the Regions are created, leaving you in Select Mode to view the
results. If all looks well, a simple press of the Delete key will remove the silence areas.
If you decide to change your mind, use the Undo EDL option on the Levelizer, and you will be instantly returned to your previous
condition, ready to adjust the settings and try again.
Remove Silence (Automatic)
This option operates on the current Levelizer track, using the current Gate settings to actually Split and
Remove Regions at each Threshold crossing point. The splits are created according to the following rules:
?Audio sections below the Threshold are split and removed. The split point is set at the end of the Release cycle.
?Audio sections above the Threshold are split and kept. The split point is set in front of the actual Threshold crossing point by
the amount equal to the Attack time.
?If SAW's Auto Zero Cross Detection option is active, each split point is adjusted to the nearest zero cross, creating extremely
clean and quiet Region boundaries.
Activating this option causes a pre-scan starting from the MultiTrack cursor position to the end of the track, or from the
beginning to the end of a marked area. At the end of the pre-scan, the Regions are created, removing the silence areas.
If you decide to change your mind, use the Undo EDL option on the Levelizer, and you will be instantly returned to your previous
condition, ready to adjust the settings and try again.