录音/制作/创作 吉他 扩声技术 视频技术 作品展示 生活 信息 更多... | 音频应用专卖店

还有哪位听说过安装logic不能是4G内存的?

( 11 )
 
[收藏]

1374
#1 07-11-23 03:00

还有哪位听说过安装logic不能是4G内存的?

搜遍网络 没有相关的信息
但是我装logic时候确实半截死机了
拆掉一条内存就能正常安装完
试了2次 结果相同 不会是偶然死机
这么个消息竟然搜遍网络没人说过 不知道蹊跷什么呢
要不是 样儿年华 提醒 还不知道logic为什么会这个装况

2065
#2 07-11-23 03:01
我是4g,没有任何问题啊!

926
#3 07-11-23 05:06
我用4G,无任何问题
你看看你主板的BIOS设置,可能与里面的设置有关

302
#4 07-11-23 12:36
提示: 作者被禁止或删除 内容自动屏蔽

2700
#5 07-11-23 13:24
楼主,你的机器是PC机器么?

1374
#6 07-11-23 13:44
对 是PC装的logic

2700
#7 07-11-23 21:53

回复 #6 小扣 的帖子

pc装的苹果系统会有很多问题,无法判断!!Sorry!

1873
#8 07-11-23 23:42
PC机器装苹果是有问题的]
因为是UNIX的核心需要64位寻址所以建议用以下方法
我没有时间翻译
自己看看很简单的!

需要内核替换支持
V5.2: Several optimisations on memory speed detection (might fix  
loginwindow crash in some cases) and fix to fully enable nvram. You  
can now set nvram value, and it will persist till reboot.

all changes made to applesmbios.kext only.

V5.1: Cosmetic changes and bugfixes.

Greetings, Everyone.

This package will allow PC users to install an EFI boot sector, which will make our lives a lot easier for present and future OSX-on-a-PC projects and developments.

EFI V5.1 Can be installed in two ways, depending from the use you need to make of it.

- Advanced installation --- For Multi-Booting systems ---

Install GRUB Bootloader

copy boot_v5 anywhere on:  fat32/reiserfs/xfs/ext2/ext3/ntfs/any partition supported by grub

Add entry to your menu.lst such as the following:

title Darwin
    kernel (hd0,0)/boot/boot_v5

Where:

hd0,0 is the partition where you copied boot_v5 and

/boot is the path where you copied boot_v5

After GRUB loads, choose Darwin and press enter - you will have 5 seconds to select the hard drive with osx on it , 80 - first, 81 - second, 82 - third and so on.

If no key is pressed during 5 seconds, it will start booting the default drive.

- Easy installation --- For Single-Booting systems ---

Create directory iamefi in the root folder of your boot osx disk.

Copy all included files into it

Boot in Single User mode by mashing F8 key during boot (right after bios POST) type -s and press enter

Then enter the following commands

cd /iamefi

./startupfiletool /dev/rdiskXsX ./boot_v*

reboot

Whereas rdiskXsX is the partition where your OSX install is (you can check that out on Disk Utility in OSX)

And v* is the EFI version bootloader you wish to use.

Existing 10.4.10 and 10.5/10.5.1 kernels compiled from sources, made by Toh are already known to work with this package.

You can also use vanilla appleacpiplatform.kext for leopard, and vanilla applesmbios.kext, but you might experience some glitches in system profiler and incorrect processor recognition with the latter.

dsmos.kext is mandatorily needed for vanilla and binary hacked kernels.

All credits for this work goes to def, Turbo , netkas, Dmitrik. And all testers.

English readme corrected by TorqueX86.

(C) ToH, 2007

1873
#9 07-11-23 23:46
对了这个boot_v和其他文件你可以在leopard的原版安装光盘中提取!<br /><br />安装不正确的话请在资源管理器里面看<br />内存还是只认到3.65<br /><br />虽然在关于本机看见的是4G实际上是寻址不正确

请勿比这样操作否则你运行大型软件都有可能四国!"


如果有好的办法情可其他朋友一起分享!

[ 本帖最后由 夏辉 于 07-11-23 23:50 编辑 ]

192
#10 07-11-27 18:49
你可以装的时候安两条,装完后再安两天,我就是这样的,没任何问题呀

1044
#11 07-11-27 18:57
我的内存是5G也没什么问题啊

468
#12 07-12-3 10:46
PC装MAC会出现很多意料之外的问题! 不好回答 只能忍了吧
我MAC上8G内存 一点问题都没有
您需要登录后才可以回帖 登录 | 注册

本版积分规则

搜索