INPUTS | 8 Analogue; electronically balanced |
Connectors: | Phoenix/Combicon removable screw connectors. |
Line Inputs: | Nominal gain 0dB, electronically switchable to +12dB gain, input impedance 10kOhm |
Mic/Line Inputs: | Nominal gain 0dB, electronically switchable up to +72dB, in +6dB steps, input impedance 3.5kOhm |
Maximum input level: | +20dBu with 0dB input gain |
| (+8dBu with 12dB gain) |
CMRR | >75dB at 1KHz |
| |
Equiv. Input Noise (EIN): | <-128dBu typ with 150 Ohms source |
| |
Phantom power: | 48V nominal, selectable per input |
| |
AES/EBU Digital Inputs: | 2 x 2 channel inputs per card |
| |
Sample Rates: | 32 to 96kHz, auto selected |
| |
Connectors: | Phoenix/Combicon removable screw connectors |
| |
OUTPUTS | 8 Analogue; electronically balanced |
| |
Connectors: | Phoenix/Combicon removable screw connectors. |
| |
Maximum Output Level: | +20dBu |
| |
AES/EBU Digital Outputs: | 2 x 2 channel outputs per card |
| |
Sample Rates: | 44.1, 48, 88.2, 96kHz, user selectable |
| |
Connectors: | Phoenix/Combicon removable screw connectors |
| |
Digital Resolution: | 24 bit |
| |
Frequency Response: | 15Hz to 20KHz (+-0.5dB) |
| |
THD: | <0.01% (20Hz to 20KHz, +10dBu output) |
Dynamic Range: | 105dB typ. (22Hz to 22KHz unweighted) |
| |
| 108dB typ. (A-weighted) |
Crosstalk: | <-75dB |
| |
CONTROL PORTS | 8 inputs and 8 outputs |
| |
Control Input Voltage: | 0 to 4.5v |
| |
Control Input Impedance: | 4.7kOhms to +5V (2-wire mode) |
| |
| >1MOhm (3-wire mode) |
| |
Logic Output Voltage: | 0 or +5V unloaded |
| |
Logic Output Impedance: | 440 Ohm |
| |
WATCHDOG OUTPUT | Phoenix/Combicon connector for failsafe control |
| |
Opto Output current: | 14mA maximum |
| |
Withstanding voltage: | 80V maximum (Off) |
| |
Series Impedance: | 220 Ohms (isolated) |
| |
Panel Led Indicators: | Signal Present (per input), CLIP (per input) |
| |
Mains Voltage: | 85-270V AC, 50/60Hz, |
| |
Power Consumption: | <35VA |