A-PRO Driver Ver.1.0.0 for Windows® 7 64-bit Edition / 32-bit Edition[size=-1](Note)
In no event shall Roland Corporation ("Roland") be liable to end-users for any damages whatsoever, including but not limited to financial damages for loss of business profits or business information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages.
| * | All files and other material contained in this folder are copyrighted by the Roland. Any alteration, modification, duplication, distribution, or reproduction of this material is prohibited. Additionally, Roland reserves the right to make changes to these programs and files without prior notice. |
| * | Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. |
| * | All product names mentioned in this document are trademarks or registered trademarks of their respective owners. |
About this driverThis is the A-PRO driver for Microsoft® Windows® 7 64-bit Edition / 32-bit Edition.
System requirementsThis driver has the following requirements.
Operating System Microsoft® Windows® 7 64-bit Edition
Microsoft® Windows® 7 32-bit Edition Computer Windows-compatible PC equipped with USB 2.0/1.1 port
| * | This product cannot be used with a USB 3.0 port that is not compatible with USB 2.0/1.1 specification. |
| * | If this product does not work correctly when connected to a USB 3.0 port, you will need to connect it to a USB 2.0/1.1 port. |
| * | Even if connected to a USB 3.0 or a USB 2.0 port, this product will operate as a USB 1.1/1.0 device; the performance of the product will not change. |
| * | This driver cannot be used in a virtual Windows environment, such as Windows XP Mode (Virtual Windows XP) or Virtual PC. |
| * | Mac computers running Microsoft Windows are not supported. |
Cautions and Limitations
- Sound interruption or other less-than-perfect outcomes may be experienced if your computer's performance and specifications are somewhat inadequate. The types of applications you use and the way in which you use them can also influence the experience you receive.
- On some computers, the driver does not load correctly if the A-PRO is already connected when Windows is started up. As a result, it will not be possible to use the A-PRO via USB. If this occurs, wait until after Windows has started to turn on the power of the A-PRO (or to connect it).
- If the A-PRO does not work correctly after resuming from Sleep mode, you should exit all applications that use the A-PRO, and then turn the power of the A-PRO off and on again.
- If the USB cable is disconnected and reconnected while the A-PRO is in use, or if the power of the A-PRO is turned off, then on again, it may stop operating correctly. If this occurs, after resuming, you should exit all applications that use the A-PRO, and turn the power of the A-PRO off, then on again.
- If your computer was experiencing a heavy processing load, such as when accessing a CD-ROM Drive or network while the A-PRO was being used, the A-PRO may no longer operate correctly. If this occurs, stop the playback or recording, then try starting playback or recording over again. If you are still unable to play back or record, quit all programs that are using the A-PRO, then turn the A-PRO off and then on again.
