P1000
Power Rating: FTC (20Hz-20kHz, <0.2% THD) EIA (1kHz, 0.2% THD)
50 wpc into 8Ω 55 wpc into 8Ω
55 wpc into 4Ω 60 wpc into 4Ω
110 wpc into 8Ω (bridged mono) 120 wpc into 8Ω (bridged mono)
Signal-to-Noise: 100dB below rated output “A” weighted
Frequency Response: 20Hz to 20kHz, ±0.1dB
0.1Hz to 100kHz, +0/–3dB
Slew Rate: 20 V/μs
Input Impedance: 47,000Ω per phase balanced
10,000Ω per phase unbalanced
Input Sensitivity for rated output power:
Unbalanced: 0.714V RMS (8Ω), 0.554V (4Ω)
Balanced: 0.375V (8Ω), 0.277V (4Ω) per phase
Gain: 29dB maximum, –41dB minimum
CMRR: –70dB at 1kHz
Damping Factor: 900 (to 1kHz); 400 (to 10kHz); 40 (to 100kHz)
Power Consumption: 50W/420mA
@ 120VAC (idle power)
(both channels driven) 152W/1.3A @ 120VAC (1/8 power – 8Ω)
260W/2.2A @ 120VAC (max. power – 8Ω)
功率够了