MAC

请问大家mac10.15.7能装最新版pro tools2023和最新版uad2插件么？我的音频接口是apogee symphony io一代，应该也有相应该的驱动吧。有用过的朋友们老师们请指教，谢谢🙏

pt应该可以

最后更新时间：2023 年 12 月 12 日
受影响的产品：Pro Tools、Pro Tools HD、Pro Tools Ultimate、Pro Tools Artist、Pro Tools Studio

最低系统要求

苹果系统：
最新版本的 macOS Monterey 12.7.x 或 macOS Ventura 13.6.x
M2、M1 或 Intel 双核 i5 或更快

UAD可以：
The latest UAD software is compatible with macOS 10.15 Catalina, 11 Big Sur, 12 Monterey and 13 Ventura.

其他系统最低版本要求：
macOS13 -- v10.2.0 and higher
macOS12 -- v10.0.0 and higher
macOS11 -- v9.13.1 and higher
macOS10.15 -- v9.11.1 and higher

PT 3楼有发，最低系统要求12.7.x

apogee symphony io一代在10.15及以上系统上要安装5.5版本驱动

您好~那请问是不是10.15.7的话，还得给apogee symphony升级固件？怎么查看固件版本，感谢指点！！！ 本帖最后由 清宇 于 23-12-14 00:12 编辑

Symphony I/O Installer Downloads
CRITICAL – PLEASE READ BEFORE INSTALLING AND FOLLOW THESE DIRECTIONS

If you’re using an M1 Mac, you will need to allow user management of kernel extensions to install the Apogee driver.

Quit this installer and shutdown the Mac.
Press and hold the Mac’s Power button until the display shows Loading Startup Options, then release it. This takes you to the Startup Options screen.
In the Startup Options screen, select the Options icon, then click Continue underneath it.
Once the main window has loaded, select the Startup Security Utility in the Utilities menu. You’ll then be prompted to select the system for which you want to configure startup security. Once you’ve unlocked that disk, click on the button to set startup security for that disk. Then select Reduced Security, and check the upper of the two boxes, which allows user management of kernel extensions.
Quit Startup Security Utility, and select Restart from the Apple menu to restart into normal mode.
Once you’ve restarted, launch this installer again and begin the install. Towards the end of the install, before you restart the Mac, open System Preferences and go to the General tab of the Security & Privacy pane. If you see a message towards the bottom of the window with an Allow button, then unlock the Security & Privacy pane and click the Allow button. If the Apogee installer has finished, restart the Mac.

Current Version
Symphony System Release 5.5 Installer

Adds support for macOS 11 Big Sur and higher (Intel and Apple Silicon M1 Macs) for Symphony I/O (original Mk1), Symphony64 PCIe card, and Symphony64|Thunderbridge
This installer is not compatible with macOS 10.15 or lower. Use previous Release installers for older macOS versions.
System Requirements for Mac

Apple Mac computer with built in Thunderbolt connector
macOS 11.0 or higher
4 GB minimum RAM, 8 GB or higher recommended
IMPORTANT NOTE ON INSTALLATION

Permission to run Apogee System Extension MUST be allowed in macOS Security & Privacy – DO NOT SKIP THIS STEP – Read More

NOTE ON FIRMWARE

Nothing has been changed since the previous Symphony Release, other than support for macOS 11.0 and Apple M1. If your Symphony I/O is already on the latest firmware, there is no firmware update required. If your Symphony I/O is using older firmware, you will need to download the Symphony I/O Firmware Updater from the previous Release 5.4c Installer package and use an Intel Mac running macOS 10.10.5 or earlier (10.6.8 – 10.9 recommended) with USB 2.0 ports to update the firmware, as the firmware updater app is not compatible with any version of macOS newer than 10.10.5.

KNOWN ISSUES

I/O level controls for Symphony I/O do not work from Audio MIDI Setup, System Preferences Sound, or the Keyboard Volume Control.
Clock Source menu no longer available in Audio MIDI Setup. Must use controls in the Maestro 2 software.
GUI graphical anomalies in Maestro 2 software

Previous Version
Symphony System Release 5.4c Installer

Compatible with macOS 10.15 Catalina, 10.14 Mojave, 10.13 High Sierra, 10.12 Sierra, 10.11 El Capitan, 10.10 Yosemite, 10.9 Mavericks
Includes Apple’s Notarization requirements required for macOS 10.15 Catalina. All other features are the same as previous 2.5 version.
IMPORTANT NOTE ON INSTALLATION

1) To properly install this update, you must run this installer TWICE. The first time you install you are authorizing the kernel extension on your Mac (see #2). When the computer restarts after the first install, run the installer again to complete the installation of the update.

2) *macOS 10.15, 10.14 & 10.13 – Please make sure that after installing you have done this important Security step and Restarted the computer. This will allow the Apogee Driver to run so your device will be recognized properly – Read More

Please Note: Symphony I/O is compatible with macOS 10.15 and lower. However the firmware can only be updated using macOS 10.10 or lower (10.6.8 – 10.9 preferred). You may use the Firmware Updater from the v5.4 download on the older OS to execute the update

10.15不用升级驱动，5.4可以用

我就是10.15.7，装的2023版pt

                                                                                                                                                        
                        我的电脑系统也是macOS Catalina 10.15.7


前一阵下了最新的UAD软件11.0.1（官网提示兼容10.15.7https://help.uaudio.com/hc/en-us/articles/210208926），
结果UAD2的插件 在宿主中不能加载，联络客服 试了很多方法都不行，包括用Time Machine 退回之前版本（10.2.3）最后就是卸载重装（10.2.4）折登了两周，才解决问题。。

所以建议楼主 为了兼容MacOS Catalina系统，最好不要下载UAD最新版本的软件11.0.1

下面是历史版本发布说明：https://help.uaudio.com/hc/en-us/articles/215270403
历史版本下载https://help.uaudio.com/hc/en-us/articles/215267203 本帖最后由 13CLUB 于 24-1-18 00:57 编辑