The VHD 2000 is the amplifier, control unit for the VHD 2.0. It is a three-way, rack-mounted unit containing high frequency, mid frequency and mid-bass amplifiers. It also houses all processing and control electronics for the subwoofer system. The amplifiers feature Class AB mosfet amplifiers for highs and mids with transformer-balanced outputs. The mid bass amplifier is a new version of KV2 Audio’s high efficiency, analogue switch-mode amplifier delivering 1600 Watts. The VHD 2000 is the world’s first system with proprietary digital signal delay technology using direct stream digital components providing a 6 MHz sampling rate. The unit provides complete audio system control including equalization, overdrive protection, thermal protection and user adjustable set up parameters. Once the set-up process is completed, the VHD 2000 manages all system functions and assures optimal performance. The VHD 2000 is “Line Driver Ready” and has its own input impedance selector on the front panel to accurately match up the input impedance to the output of any mixer used.
In most cases it would be advisable to use a VHD LD4 line driver in addition at the mixer end to ensure that the line to the amplifier is driven correctly and the signal integrity maintained.
Additional features include an electronic Tilt function which will electronically tilt the VHD 2.0 Mid high cabinet down by 10 degrees. This is particularly useful where the physical placement of the boxes is restricted relative to the intended area of coverage.
Specifications
VHD 2000 - System Amplification & Control
HIGH FREQUENCY AMPLIFIER
Type
Class AB - Push Pull - Low IM Design
Rated Continuous Power
200 Watts
Distortion
<.005% THD
Operating Bandwidth
2.5kHz - 20kHz
Type
Class H --High Efficiency
Rated Continuous Power
1000 Watts
Distortion
<.005% THD
Operating Bandwidth
500Hz - 2.5kHz
Type
High-efficiency, current-enhancing
Switch Mode technology with Active Filter
Rated Continuous Power
1200 Watts
Distortion
<.005% THD
Operating Bandwidth
100Hz - 500Hz
Height
7.00” (177.8mm)
Width
19.00” (483mm)
Depth
19.5” (495mm)
Weight
70.4 lbs. (32kg)
US
115VAC, 60Hz
US recommended amperage
20 Amps
AC Connector
Neutrik PowerCon
Europe
230VAC, 50Hz
Eur. recommended amperage
10 Amps
AC Connector
Neutrik Powe
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?注册
x