- 第 10 页 -
What's new in Peavey ReValver 4:
- Over $250 of modules!
- Redesigned ReValver 4 engine
- Improved tone, GUI / UI
- More in depth tweaking of modules
- Dual signal chains for multiple rigs
- All equivalent amp/stomp/effects/RIR Cab modules from III.V (listed below)
- **NEW** RIR 2 Cabinet Module plus 21 included cabs and all mics (over 650 combinations)
- **NEW** World Wide Verb, "Again" Delay, Kaften Noise Gate, Square Phase, Digital/Analog Flanger Modules
- **NEW** Input and Output Modules including ACTÖ (Audio Cloning Technology), Noise Gate, Tuner, Compressor, Parametric EQs, Multiple Chains Blending/Panning, VU Meter with Input Normalisation
- Additional ACTÖ Content (S-Caster and LP Standard Bundles)
- Pedal Board for Stomp Boxes
- GIG Mode for seamless rig switching via MIDI
- AAX Plug in support (along with VST/AU and Stand Alone Operation)
- Access to the Amp Store for an ever growing selection of new modules, cabinets and ACT Content
- Over $250 of modules!
- Redesigned ReValver 4 engine
- Improved tone, GUI / UI
- More in depth tweaking of modules
- Dual signal chains for multiple rigs
- All equivalent amp/stomp/effects/RIR Cab modules from III.V (listed below)
- **NEW** RIR 2 Cabinet Module plus 21 included cabs and all mics (over 650 combinations)
- **NEW** World Wide Verb, "Again" Delay, Kaften Noise Gate, Square Phase, Digital/Analog Flanger Modules
- **NEW** Input and Output Modules including ACTÖ (Audio Cloning Technology), Noise Gate, Tuner, Compressor, Parametric EQs, Multiple Chains Blending/Panning, VU Meter with Input Normalisation
- Additional ACTÖ Content (S-Caster and LP Standard Bundles)
- Pedal Board for Stomp Boxes
- GIG Mode for seamless rig switching via MIDI
- AAX Plug in support (along with VST/AU and Stand Alone Operation)
- Access to the Amp Store for an ever growing selection of new modules, cabinets and ACT Content
Peavey.ReValver.4.Mac.OSX.FIXED-COPYL3FTR3R
Description: Introducing Peavey ReValver® 4
Redesigned from the ground up, ReValver 4 — the latest version of Peavey's award-winning ReValver modeling software — contains revolutionary amp modeling capabilities that capture the true characteristics of real tube amplifiers.
Running Stand Alone or as an AAX/VST or AU plug-in on Mac or PC, ReValver is renowned for its industry-leading amp modeling accuracy which is achieved by modeling an amplifier down to the component level. Now Peavey has updated and improved the modeling engine in ReValver 4, taking amp modeling to a whole new level of realistic tone-shaping possibilities. ReValver 4 also incorporates a GUI and UX redesign and the ability to run on a Windows® tablet, plus other high-level features including GIG mode, ACT™ (Audio Cloning Technology) and RIR 2 cabinet modeling.
Peavey ReValver 4 Mac OS X [FiXED] screenshotBased on feedback from the extensive ReValver user community, the application's redesign has been done so to improve user experience and workflow. The GUI now separates pedal board, amps/cabs and effects into their own views, thus minimizing the amount of vertical scrolling needed to navigate the application.
GIG mode further expands ReValver's power as a live performance solution by allowing the user to load 8 presets into memory and seamlessly switch between them. The presets can also be assigned to MIDI controller switches. In addition, another primary consideration of the GUI and UX redesign was to make ReValver 4 the ideal solution for amp modeling on Windows tablets. As a result, the combination of ReValver 4, an audio interface, and a Windows tablet makes the perfect live performance rig.
Peavey's ReValver 4 also features ACT (Audio Cloning Technology) modules that allow the user to mold and shape the guitar sound at both the input (before amp modeling) and output (after modeling). At the input, ACT turns ReValver into an instrument modeler by altering the incoming guitar signal to mimic the sound and characteristics of other instruments, such as acoustics, folk instruments, and even other electric guitar and pickup combinations. At the output, ACT allows the user to load presets that sculpt the signal to fit in a recording mix or mimic the sonic characteristics of famous guitar rigs.
With improved Impulse Responses, ReValver 4's RIR 2 feature takes cabinet modeling to a whole new level of accuracy and realism by giving the user independent control of speaker configuration, microphone, and mic placement, allowing for almost endless tone shaping options. Also, the electrical features or the cabinet that alter the response of the amp have been captured, allowing for even greater realism and dynamics. The new Pedal Board feature provides a familiar environment to build and edit an effects chain before the amplifier whilst the effects rack sits post amp for all your delay, reverb and modulation needs.
home page
www.peavey.com/products/revalver/
N0TES:
Read NFO please,(see below for the link) some important, uh, infos inside.
Your dear copylefter wasted half of last night decrypting and resaving all
factory preset, so you lil preset addict won't complain. You owe me a favor
Preset created on cracked version won't work on legit and vice-versa,
no way around this as legit presets are encrypted with RSA1024.
Live with it. Or just buy it, they dropped price a lot since v3.5, it's worth the money
FiX N0TES:
I missed an encryption call in first release, it won't save noise gate and pickup settings. Now everything works.
copylefter
link for .nfo
![]()
Description: Introducing Peavey ReValver® 4
Redesigned from the ground up, ReValver 4 — the latest version of Peavey's award-winning ReValver modeling software — contains revolutionary amp modeling capabilities that capture the true characteristics of real tube amplifiers.
Running Stand Alone or as an AAX/VST or AU plug-in on Mac or PC, ReValver is renowned for its industry-leading amp modeling accuracy which is achieved by modeling an amplifier down to the component level. Now Peavey has updated and improved the modeling engine in ReValver 4, taking amp modeling to a whole new level of realistic tone-shaping possibilities. ReValver 4 also incorporates a GUI and UX redesign and the ability to run on a Windows® tablet, plus other high-level features including GIG mode, ACT™ (Audio Cloning Technology) and RIR 2 cabinet modeling.
Peavey ReValver 4 Mac OS X [FiXED] screenshotBased on feedback from the extensive ReValver user community, the application's redesign has been done so to improve user experience and workflow. The GUI now separates pedal board, amps/cabs and effects into their own views, thus minimizing the amount of vertical scrolling needed to navigate the application.
GIG mode further expands ReValver's power as a live performance solution by allowing the user to load 8 presets into memory and seamlessly switch between them. The presets can also be assigned to MIDI controller switches. In addition, another primary consideration of the GUI and UX redesign was to make ReValver 4 the ideal solution for amp modeling on Windows tablets. As a result, the combination of ReValver 4, an audio interface, and a Windows tablet makes the perfect live performance rig.
Peavey's ReValver 4 also features ACT (Audio Cloning Technology) modules that allow the user to mold and shape the guitar sound at both the input (before amp modeling) and output (after modeling). At the input, ACT turns ReValver into an instrument modeler by altering the incoming guitar signal to mimic the sound and characteristics of other instruments, such as acoustics, folk instruments, and even other electric guitar and pickup combinations. At the output, ACT allows the user to load presets that sculpt the signal to fit in a recording mix or mimic the sonic characteristics of famous guitar rigs.
With improved Impulse Responses, ReValver 4's RIR 2 feature takes cabinet modeling to a whole new level of accuracy and realism by giving the user independent control of speaker configuration, microphone, and mic placement, allowing for almost endless tone shaping options. Also, the electrical features or the cabinet that alter the response of the amp have been captured, allowing for even greater realism and dynamics. The new Pedal Board feature provides a familiar environment to build and edit an effects chain before the amplifier whilst the effects rack sits post amp for all your delay, reverb and modulation needs.
home page
www.peavey.com/products/revalver/
N0TES:
Read NFO please,(see below for the link) some important, uh, infos inside.
Your dear copylefter wasted half of last night decrypting and resaving all
factory preset, so you lil preset addict won't complain. You owe me a favor
Preset created on cracked version won't work on legit and vice-versa,
no way around this as legit presets are encrypted with RSA1024.
Live with it. Or just buy it, they dropped price a lot since v3.5, it's worth the money
FiX N0TES:
I missed an encryption call in first release, it won't save noise gate and pickup settings. Now everything works.
copylefter
link for .nfo
佛西辞 发表于 15-7-7 21:12
http://pan.baidu.com/s/1gd5yFcf
Peavey.ReValver.4.Win64.Incl.Patched-Egg
佛哥，能再分享一下么，下不到了。谢谢