- 第 3 页 -
单眼皮女孩 发表于 16-3-1 17:23
没有呀，不知道为什么不行？
我有过一次提示错误，好像是密码错误，后来重弄了个QQ号注册了下，认真输入密码，然后登入，好了。 如果怕网络问题，去lantern贴吧下个lantern装好打开，再去开这些网页，据说是google赞助的VPN，一件傻瓜式的那种翻qiang。
8280225 发表于 16-2-23 20:51
在输入密码那块死活过不去，怎么填都不行，一大写一小写一数字，怎么填都过不去！
第一次注册时用的密码，下次注册用了同样的就提示过不去。 换了一下好了。
Starryson 发表于 16-3-2 12:04
我有过一次提示错误，好像是密码错误，后来重弄了个QQ号注册了下，认真输入密码，然后登入，好了。 如果 ...
楼主好！怎么也不行。希望把你的测试软件发上来共享。谢谢！
本帖最后由 Starryson 于 18-4-23 15:45 编辑
试用：
进dirac.com ，点online store，页面里找到dirac live free trial可以试用，到了提交订单页面，随意填入姓名和邮箱，确定提交成功后，去你的邮箱收邮件，邮件里有一个大概是叫portal.dirac.se的链接进去注册一下（点don't have account），注册完回到portal.dirac.se页面，登录刚刚注册的账号，然后点Activation按钮(并排的有一个按钮进去就是软件下载链接)，用邮件给你的码激活，这个号就是软件里激活用的那个账号。
内蒙古刘琦 发表于 18-4-16 10:50
楼主好！怎么也不行。希望把你的测试软件发上来共享。谢谢！
试用：
进dirac.com ，点online store，页面里找到dirac live free trial可以试用，到了提交订单页面，随意填入姓名和邮箱，确定提交成功后，去你的邮箱收邮件，邮件里有一个大概是叫portal.dirac.se的链接进去注册一下（点don't have account），注册完回到portal.dirac.se页面，登录刚刚注册的账号，然后点Activation按钮(并排的有一个按钮进去就是软件下载链接)，用邮件给你的码激活，这个号就是软件里激活用的那个账号。
This is the third tab in the Dirac Live Calibration Tool™
In order to get an accurate measurement of the sound system, some initial adjustments of the
playback and recording levels are required. Start by placing the microphone inside the listening area.
1. For each loudspeaker channel, select the sound card output channel that it
is connected to using the corresponding “Output channel” drop-down box
(J).
Use the same device and channel assignment that will be used later
for listening through the Dirac Audio Processor (DAP). If the
assignments don’t match with DAP, then filters may be applied to
the wrong channels or audio output may even be muted.
The Subwoofer checkboxes (O) are only editable with the “Custom”
system configuration selected in the “Choose system configuration”
drop down box (A) in the “Sound system” setup tab.
2. Start playing a test noise in the selected output channel by pressing the Test
button (K).
这是步骤3的说明，感觉我的声卡设置应该是哪里有问题，
In order to get an accurate measurement of the sound system, some initial adjustments of the
playback and recording levels are required. Start by placing the microphone inside the listening area.
1. For each loudspeaker channel, select the sound card output channel that it
is connected to using the corresponding “Output channel” drop-down box
(J).
Use the same device and channel assignment that will be used later
for listening through the Dirac Audio Processor (DAP). If the
assignments don’t match with DAP, then filters may be applied to
the wrong channels or audio output may even be muted.
The Subwoofer checkboxes (O) are only editable with the “Custom”
system configuration selected in the “Choose system configuration”
drop down box (A) in the “Sound system” setup tab.
2. Start playing a test noise in the selected output channel by pressing the Test
button (K).
这是步骤3的说明，感觉我的声卡设置应该是哪里有问题，