- 第 5 页 -
frtrnr 发表于 22-1-23 01:16
ROM下载：DBWBP.com - Synthesizer ROM archive
哪位详细讲解以下为什么始终提示找不到rom
比如我是这样 ...
只需要满足两个条件就能运行：1.插件跟rom同目录，2.是virus B或C的rom。我觉得已经没有更简单的说明了
martjay 发表于 22-1-23 17:52
只需要满足两个条件就能运行：1.插件跟rom同目录，2.是virus B或C的rom。我觉得已经没有更简单的说明了
感谢！
如果说 ROM下载：DBWBP.com - Synthesizer ROM archive 里面的bin文件目前都不支持
那么，您提供的： 如下： 预制包，都不是 bin文件格式啊？？？
这是virus硬件的预制包，独乐乐不如众乐乐，提取码你们都懂的~
https://pan.baidu.com/s/1zoGSew_xJh_uIteV_r5UEQ
frtrnr 发表于 22-1-23 02:24
感谢！
如果说 ROM下载：DBWBP.com - Synthesizer ROM archive 里面的bin文件目前都不支持
那么，您提 ...
mid文件是预制包，bin文件是rom
martjay 发表于 22-1-23 18:26
mid文件是预制包，bin文件是rom
好吧，我实在太笨了
本主题下，您能否提供一个可用的rom，随便几十K就好，我体验一下。
拜托martjay大人！
frtrnr 发表于 22-1-23 02:30
好吧，我实在太笨了
本主题下，您能否提供一个可用的rom，随便几十K就好，我体验一下。
拜托martj ...
加载TI预制我用的是C的ROM
本帖最后由 martjay 于 22-1-23 21:25 编辑
有的话就YYDS了
1.2.5b (2022.01.29):
- [Imp] Smaller general performance improvements
- [Imp] Additional performance improvements for ARMv8 based CPUs (including Apple M1)
- [Fix] CPU spikes in complex patches or multi mode
- [Fix] Part Select buttons were visually broken (always appeared as being selected)
- [Fix] Presets were stored with incorrect version number, causing Virus B & C features to be disabled by the DSP when being loaded (Reverb, Osc 3, EQ, ....)
- [Fix] Preset was corrupted when saving to an already existing file
- [Fix] Some presets caused the emu to crash
观众反应
1.2.10 beta (2022.03.01):
- [Imp] UI knobs now react to parameter changes via Midi Control Change, Poly Pressure and Sysex
- [Imp] Patches loaded via "Load" button that only contain a single preset are now loaded to the edit buffer of the selected part
- [Imp] Emulation performance improvements (5% - 10%)
- [Fix] Presets were not always loaded correctly
- [Fix] Loading of presets didn't (properly) update the UI
- [Fix] Patch Browser failed to load some midi file which resulted in no presets being displayed
- [Fix] Patch Browser didn't display the proper Virus Model in all circumstances
- [Fix] Midi bank select (sent as Midi CC) was off-by-one in single mode
- [Fix] Part bank select and part program change (as sysex) didn't work for single mode
- [Fix] Various midi clock issues due to midi clock start event being missing
- [Fix] "Assign3 Destination3" was named "Assign2 Destination3" (automation name)
- [Fix] "Assign3 Amount3" was named "Assign2 Amount3" (automation name)
- [Fix] Osc 1 & 2 Wave Select parameter was off-by-one
- [Fix] Key follow base UI element not working
- [Fix] Do not crash when attempting to load a preset that is not a Virus preset
本帖最后由 martjay 于 22-3-1 17:19 编辑
- [Imp] UI knobs now react to parameter changes via Midi Control Change, Poly Pressure and Sysex
- [Imp] Patches loaded via "Load" button that only contain a single preset are now loaded to the edit buffer of the selected part
- [Imp] Emulation performance improvements (5% - 10%)
- [Fix] Presets were not always loaded correctly
- [Fix] Loading of presets didn't (properly) update the UI
- [Fix] Patch Browser failed to load some midi file which resulted in no presets being displayed
- [Fix] Patch Browser didn't display the proper Virus Model in all circumstances
- [Fix] Midi bank select (sent as Midi CC) was off-by-one in single mode
- [Fix] Part bank select and part program change (as sysex) didn't work for single mode
- [Fix] Various midi clock issues due to midi clock start event being missing
- [Fix] "Assign3 Destination3" was named "Assign2 Destination3" (automation name)
- [Fix] "Assign3 Amount3" was named "Assign2 Amount3" (automation name)
- [Fix] Osc 1 & 2 Wave Select parameter was off-by-one
- [Fix] Key follow base UI element not working
- [Fix] Do not crash when attempting to load a preset that is not a Virus preset
本帖最后由 martjay 于 22-3-1 17:19 编辑
观众反应
