下面是CAKEWALK论坛上的关于SONAR4版本导出MP3时的方法,主要是从第3步,只要能找到安装文件里的相应文件夹应该没什么问题,祝好运
Have you installed the profile as described in the earlier link posted by Craig Anderton (Sonar guru), this is essential, viz:
"However, you CAN add a profile for LAME so that it shows up as one of your export options. Here's what you do (this assumes you have LAME installed on your machine somewhere).
1. Insert the Sonar 4 distribution CD-ROM into your drive.
2. Don't autorun. Instead, explore the CD.
3. Open the folder called Utilities.
4. Open the folder External Encoder Profiles.
5. Double-click on any of the encoder options you want to add (e.g., LAME MP3 High Quality Stereo.reg).
6. You'll be asked if you want to add this information to the registry. Tremble in fear for a bit because you're adding something to the registry, then click on Yes. You'll be informed that it was added successfully.
7. Go Program Files > Cakewalk > Shared Utilities.
8. Double-click on the EncoderConfig.exe program.
9. In the "Friendly Name" field, select the Profile you want (e.g., LAME MP3 High Quality Stereo)
10. Under Path, enter the path to the LAME encoder folder installed on your computer in place of the default path.
11. Double-check that you've entered the correct path, then click on Save. This is important!! Otherwise Sonar won't be able to launch the encoder.
12. Click on Close to close the External Encoder Config.
13. Now, open Sonar. When you go to Export Audio, any of the profiles you configured will show up as an export option."
