- 第 1 页 -
Saving and Recalling Individual Groups of Controllers
The controllers of the Keystation Pro 88 are divided into three Groups.
Group A:
Pitch Bend Wheel
Modulation Wheel
Transport buttons (5 buttons above the wheels)
Sustain Pedals 1 and 2 (pedals not included)
Expression pedal (pedal not included)
Settings for all Zones
Group B:
24 Rotary knobs
8 buttons below the rotary knobs
Group C:
9 Faders
9 buttons below the faders
To clarify the group a controller belongs to, each assignable controller has been labeled
with a letter and a number. The letter represents the controller’s group designation.
When you press STORE or RECALL, you will see the LEDs above the ZONE/GROUP
buttons flashing. Group mode is automatically selected, and the flashing LEDs represent
the Groups that the MEMORY STORE/RECALL will apply to. When you press STORE,
all groups are selected automatically. If you press RECALL, the group settings for the
last recall are remembered and selected accordingly.
Example 1: Storing Only the Faders (to preset 3):
1. Press the STORE button.
2. Press the “Group A” and “Group B” buttons. Only GROUP should be flashing on the
LCD display.
3. Enter “03” using the numerical keypad or +/- buttons.
Example 2: Recalling only the Zone Settings (of Preset 2):
1. Press the RECALL button.
2. Ensure Groups B and C are not selected. By pressing the group buttons for groups
B and C, the LCD should not display them.
3. Ensure Group A is selected by pressing the “Group A” button until Group A is
displayed in the LCD.
3. Enter “02” using the numeric keypad or the +/- buttons.
希望对老兄有些帮助
The controllers of the Keystation Pro 88 are divided into three Groups.
Group A:
Pitch Bend Wheel
Modulation Wheel
Transport buttons (5 buttons above the wheels)
Sustain Pedals 1 and 2 (pedals not included)
Expression pedal (pedal not included)
Settings for all Zones
Group B:
24 Rotary knobs
8 buttons below the rotary knobs
Group C:
9 Faders
9 buttons below the faders
To clarify the group a controller belongs to, each assignable controller has been labeled
with a letter and a number. The letter represents the controller’s group designation.
When you press STORE or RECALL, you will see the LEDs above the ZONE/GROUP
buttons flashing. Group mode is automatically selected, and the flashing LEDs represent
the Groups that the MEMORY STORE/RECALL will apply to. When you press STORE,
all groups are selected automatically. If you press RECALL, the group settings for the
last recall are remembered and selected accordingly.
Example 1: Storing Only the Faders (to preset 3):
1. Press the STORE button.
2. Press the “Group A” and “Group B” buttons. Only GROUP should be flashing on the
LCD display.
3. Enter “03” using the numerical keypad or +/- buttons.
Example 2: Recalling only the Zone Settings (of Preset 2):
1. Press the RECALL button.
2. Ensure Groups B and C are not selected. By pressing the group buttons for groups
B and C, the LCD should not display them.
3. Ensure Group A is selected by pressing the “Group A” button until Group A is
displayed in the LCD.
3. Enter “02” using the numeric keypad or the +/- buttons.
希望对老兄有些帮助
[:HA:]