请推荐一个SAC控制器？
sac数字扩声系统已经初步调试完毕 现在就差一个合适的控台了 目前比较合适的是用四台百灵达的BCF2000或者一台yamaha 03d还有就是松下的DA7 四台百灵达淘宝咨询了一下价格要6400啊 03d二手大概7000 da7比较少，有的话价格也在两万或更高了。bcf2000就是纯控台了 优势之处就是可以拆成两套 给pa两台 监听两台，缺点就是6400买了个大鼠标 哈哈。 03d优势是价位底，可以作为传统数字调音台。 缺点是要翻页 致命伤是推子是60mm的 松下DA7优势一堆，缺点就是贵，贵，非常贵。而且不好找。 我的想法就是能不能有其他经济实惠的选择了。请各位大侠给出出主意。谢谢大家了。 忘了说了 我现在的配置是 一台RMEff800作为主卡 一台福斯特24轨硬盘录音机当作AD转换器。一台马头828和另一个不出名但是价格不低的adat作为DA转换器，暂时24先用着 下一步准备进两张rme 9652凑成48路就基本够用了。现在的话放用的是手头的DDA Q系列的模拟调音台 正好24路，还能当作模拟备份台。还有一台DDA Q系列的24路返听调音台预备着做另外24个话放用。设备比较凌乱暂时就不上照片了，嘿嘿 控台到手整理过后就亮一下图片。感谢大家了。
可參考以下:-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SAC Host: ASUS P5Q SE/R, Intel E8400 O/C'd to 3.8ghz, 3 x RME HDSP 9652, XP Pro
SAC Gear: 9 x ADA8000, 4 x Audiorails, 1 x BCF2000
SAC Config: FOH + 12 stereo IEM mixes
Misc: Dual Linkwitz-Riley plugin, Studio Levelizer, Studio Reverb, Frequency Analyzer, SAWStudioLite
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you're talking about 72 analog ins, the easiest ways that come to mind are 3 RME 9652 cards (plus preamps), or Motu 424 + 3 2408 boxes.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Using the MOTU's, I had a 96 in / 50 out system up and running (only 72 accessible to SAC of course) running off a 424x card. Worked really nice ... amazing the throughput of that card.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Two RME RayDAT boards give you 64 channels. Then you can buy these little 4-channel AIN and AOUT boards to give you a total of 72. Don't know if the 4 in/out are worth the price ($300 for each board, total of $600 for 4 in and out). Then again, it's cheaper than adding another RayDAT just to get 8 in/out.
The little AIN/AOUT boards, btw, are line-level only. But perfect for added a CD player, iPod, etc.
Me, I'm sure maxing out at 64 channels is good enough. Probably even 56.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SAC Host: ASUS P5Q SE/R, Intel E8400 O/C'd to 3.8ghz, 3 x RME HDSP 9652, XP Pro
SAC Gear: 9 x ADA8000, 4 x Audiorails, 1 x BCF2000
SAC Config: FOH + 12 stereo IEM mixes
Misc: Dual Linkwitz-Riley plugin, Studio Levelizer, Studio Reverb, Frequency Analyzer, SAWStudioLite
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you're talking about 72 analog ins, the easiest ways that come to mind are 3 RME 9652 cards (plus preamps), or Motu 424 + 3 2408 boxes.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Using the MOTU's, I had a 96 in / 50 out system up and running (only 72 accessible to SAC of course) running off a 424x card. Worked really nice ... amazing the throughput of that card.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Two RME RayDAT boards give you 64 channels. Then you can buy these little 4-channel AIN and AOUT boards to give you a total of 72. Don't know if the 4 in/out are worth the price ($300 for each board, total of $600 for 4 in and out). Then again, it's cheaper than adding another RayDAT just to get 8 in/out.
The little AIN/AOUT boards, btw, are line-level only. But perfect for added a CD player, iPod, etc.
Me, I'm sure maxing out at 64 channels is good enough. Probably even 56.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------