kontakt 独立模式 可以绕过logic用大量采样
1. make sure your IAC driver is active in audio-midi setup utility
2. In logic's environment, link the IAC port to a monitor object so you dont get loopback (THANKS LPH for the tip!)
3. In the environment create a multi-channel instrument and make it send midi out on the IAC.
4. Open Kontakt (or any other standalone VI) and have it receive midi on the IAC
5. In logic, create a virtual instrument track, add the plugin "external" as your input, then within the external plugin select the multi-instrument you created, and you should now be triggering midi from logic into your VI
6. if you want the audio to go BACK into Logic (for FX, reverb, etc) you need to use either soundflower or Jack OX and create "virtual ins-outs" with these programs. To do this in soundflower, create an aggregate device in your audio-midi setup and make logic use this new aggregate audio driver. Then just select the port you want to use in the external instrument and your done! Takes some setup, but IMO it seems to be a much better way of running multi-channel VI's in Logic!
[
本帖最后由 出入三星2012 于 13-4-14 19:59 编辑 ]