- 第 1 页 -
DDMF MetaPlugin 3 v3.0.9 Incl Patched and Keygen HAPPY NEW YEAR
本帖最后由 Mr.魔音哥 于 18-1-1 07:26 编辑
![]()
Metaplugin is a plugin that loads other plugins. As simple as that. Build your own effect networks with this plugin wrapper using any VST/VST3 (and AU, if you’re on Mac) effect you already have on your harddisk. To get you started, a Mid-Side matrix, a fourband crossover filter and a routing plugin are included in the package. This means instant cross-track routing, mid-side, multiband compression/distortion/reverb/… you name it. Of course that’s only the beginning… let your imagination run free, nothing is impossible, from creating your own layered synth sounds to building whole sound generators from scratch using simple modules.
Another favourite use case for Metaplugin is to load VST plugins in Pro Tools (or to load AudioUnits in Pro Tools if you’re on a Mac). Hence, you can use it as a VST to AAX wrapper or an AU to AAX wrapper. While we’re at it: you can also use Metaplugin to load VST plugins in Logic/LogicX (VST to AU wrapper).
Supports up to eight individual channels for, e.g. surround or other multichannel purposes.
Additional stereo sidechain input
Convenient plugin organizer: scan your plugins once, then just drag and drop them onto the graph area
Internal bridge from 32 to 64 bit, with seamless plugin window integration: load 32 bit plugins in ProTools or LogicPro X without the need for a 3rd party bridging solution
Support for native Apple Audio Unit plugins
Dry/wet ratio can be adjusted for each loaded plugin.
Individual bypass for each loaded plugin
Full plugin delay compensation included.
Automate up to 100 parameters by mapping them on any parameter of a loaded plugin
Negligible additional CPU overhead.
Synths can also be loaded and played with any MIDI control, which means you can create custom synthesizers with existing building blocks.
Up to 4x oversampling option of the whole signal chain is available.
Included: mid-side matrix, multiband splitter and cross track send/receive helper plugins.
Define your own colour palette for the plugin: check!
Freely resizable plugin window for maximum convenience: check!
Can be used as a VST to AU wrapper, a VST to RTAS wrapper, an AU to RTAS-wrapper, VST to AAX wrapper or an AU to AAX wrapper.
VST3 plugins now supported, so VST3 to AU, VST3 to RTAS and VST3 to AAX is possible as well. Plus, of course, VST3 to VST or VST to VST3.
DDMF MetaPlugin 3 v3.0.9 Incl Patched and Keygen HAPPY NEW YEAR-R2R
Metaplugin is a plugin that loads other plugins. As simple as that. Build your own effect networks with this plugin wrapper using any VST/VST3 (and AU, if you’re on Mac) effect you already have on your harddisk. To get you started, a Mid-Side matrix, a fourband crossover filter and a routing plugin are included in the package. This means instant cross-track routing, mid-side, multiband compression/distortion/reverb/… you name it. Of course that’s only the beginning… let your imagination run free, nothing is impossible, from creating your own layered synth sounds to building whole sound generators from scratch using simple modules.
Another favourite use case for Metaplugin is to load VST plugins in Pro Tools (or to load AudioUnits in Pro Tools if you’re on a Mac). Hence, you can use it as a VST to AAX wrapper or an AU to AAX wrapper. While we’re at it: you can also use Metaplugin to load VST plugins in Logic/LogicX (VST to AU wrapper).
Supports up to eight individual channels for, e.g. surround or other multichannel purposes.
Additional stereo sidechain input
Convenient plugin organizer: scan your plugins once, then just drag and drop them onto the graph area
Internal bridge from 32 to 64 bit, with seamless plugin window integration: load 32 bit plugins in ProTools or LogicPro X without the need for a 3rd party bridging solution
Support for native Apple Audio Unit plugins
Dry/wet ratio can be adjusted for each loaded plugin.
Individual bypass for each loaded plugin
Full plugin delay compensation included.
Automate up to 100 parameters by mapping them on any parameter of a loaded plugin
Negligible additional CPU overhead.
Synths can also be loaded and played with any MIDI control, which means you can create custom synthesizers with existing building blocks.
Up to 4x oversampling option of the whole signal chain is available.
Included: mid-side matrix, multiband splitter and cross track send/receive helper plugins.
Define your own colour palette for the plugin: check!
Freely resizable plugin window for maximum convenience: check!
Can be used as a VST to AU wrapper, a VST to RTAS wrapper, an AU to RTAS-wrapper, VST to AAX wrapper or an AU to AAX wrapper.
VST3 plugins now supported, so VST3 to AU, VST3 to RTAS and VST3 to AAX is possible as well. Plus, of course, VST3 to VST or VST to VST3.
DDMF MetaPlugin 3 v3.0.9 Incl Patched and Keygen HAPPY NEW YEAR-R2R
详情请移步官网查询：
*请支持正版
*购买正版最稳定
*购买正版最稳定
皮化子是一个插件，它可以加载其他插件。那么简单。使用任何VST / VST3(和AU，如果你在Mac上)使用这个插件包装来构建你自己的效果网络，你的硬盘上已经有了。为了让你开始，在包中包含一个中端矩阵，一个四频交叉滤波器和一个路由插件。这意味着即时航迹路由、mid-side多频带压缩/变形/混响/…你的名字。当然这只是开始…让你的想象力自由驰骋,没有什么是不可能的,从创建自己的分层synth声音从头开始构建整个声音发电机使用简单的模块。
另一个最受欢迎的用例是在Pro Tools中加载VST插件(如果你在Mac上的话，可以在Pro Tools中加载AudioUnits)。因此，您可以将其作为VST来使用AAX包装器或AU到AAX包装器。当我们在做的时候:你也可以使用元数据在逻辑/逻辑(VST到AU包装)中加载VST插件。
支持多达八个单独的通道，例如，环绕或其他多通道的目的。
额外的立体声sidechain输入
方便的插件管理器:一次扫描你的插件，然后把它们拖放到绘图区
内部桥梁从32位到64位，有无缝的插件窗口集成:在ProTools或LogicPro X上加载32位插件，不需要第三方的桥接解决方案
支持本地苹果音频单元插件
干/湿比可以调整为每个加载的插件。
每个加载的插件的单独的旁路
包含完整的插件延迟补偿。
通过在加载的插件的任何参数上进行映射，可以自动达到100个参数
可以忽略额外的CPU开销。
Synths还可以加载和播放任何MIDI控件，这意味着您可以使用现有的构建块创建定制的合成器。
在整个信号链上有多达4x的超采样选项可用。
包括:中端矩阵、多频段拆分器和交叉轨道发送/接收辅助插件。
为插件定义自己的颜色调色板:检查!
可自由调整的插件窗口，最大方便:检查!
可以作为VST到AU包装，VST到RTAS包装，一个AU到rtas- wrapper,VST到AAX包装，或者AU到AAX包装。
现在支持的VST3插件，所以VST3到AU,VST3到RTAS和VST3到AAX都是可能的。另外，当然，VST3到VST或VST到VST3。
另一个最受欢迎的用例是在Pro Tools中加载VST插件(如果你在Mac上的话，可以在Pro Tools中加载AudioUnits)。因此，您可以将其作为VST来使用AAX包装器或AU到AAX包装器。当我们在做的时候:你也可以使用元数据在逻辑/逻辑(VST到AU包装)中加载VST插件。
支持多达八个单独的通道，例如，环绕或其他多通道的目的。
额外的立体声sidechain输入
方便的插件管理器:一次扫描你的插件，然后把它们拖放到绘图区
内部桥梁从32位到64位，有无缝的插件窗口集成:在ProTools或LogicPro X上加载32位插件，不需要第三方的桥接解决方案
支持本地苹果音频单元插件
干/湿比可以调整为每个加载的插件。
每个加载的插件的单独的旁路
包含完整的插件延迟补偿。
通过在加载的插件的任何参数上进行映射，可以自动达到100个参数
可以忽略额外的CPU开销。
Synths还可以加载和播放任何MIDI控件，这意味着您可以使用现有的构建块创建定制的合成器。
在整个信号链上有多达4x的超采样选项可用。
包括:中端矩阵、多频段拆分器和交叉轨道发送/接收辅助插件。
为插件定义自己的颜色调色板:检查!
可自由调整的插件窗口，最大方便:检查!
可以作为VST到AU包装，VST到RTAS包装，一个AU到rtas- wrapper,VST到AAX包装，或者AU到AAX包装。
现在支持的VST3插件，所以VST3到AU,VST3到RTAS和VST3到AAX都是可能的。另外，当然，VST3到VST或VST到VST3。
xlf200018 发表于 18-1-1 17:59
破解没成功，生成的文件破解后过一会还不能用。哪位和我的情况一样？
我也是，先运行了那个文件再安装也没用