RME 声卡果然厉害
我在一个国外讨论组问：为什么 Samplitude 指定要用 RME 声卡？而且是唯一指定？
下面是几个人的回答：
-----------------------------------------
I don't know why, but I can tell you that it works very well. I have a
Digiface and a Multiface. The Digiface system runs SAWStudio and Samplitude
7, and I'm very happy with the results.
Bill
------------------------------
I'm not a technical guy, but I can tell you after using Creamware TripleDAT,
Delta 1010 and some other various cards over the years, to me, this product
wipes out the competition. I did some hard, long, serious shopping before I
wound up buying 2 Multifaces. As far as I can tell, nothing, nothing,
nothing comes close. They rock. And look at this NG. It also rocks with
support. Drivers, help. hardware support at a flick of a wrist. NOBODY can
offer that.
Just my 2 sense.
Greg
------------------------------
（此人是美国一个专业销售公司的）
Basically because the development teams have had a long history of working
together and the fact that we sell and support both products...giving the
end user and dealer a one stop solution with no hassles...sounds like a nice
concept eh?
We support all soundcard manufacturers with regards to Samp but I can assure
you we will always provide better support with the Magix/RME combo because
it's what we know best...
Tom Sailor
www.xvisionaudio.com
----------------------------------------
Not only know best, but it simply is the best.
In my opinion nothing touches RME Hammerfall DSP technology.
And their tech. number isn't BS either, 0% CPU load with ASIO in a HDSP card
simply is true.
Compare that to a sloppy written ASIO driver on a non busmaster card.
I've seen to many ASIO drivers/audiocards that load the CPU around 50% when
using ASIO.
To me it is simple: Buy RME, stay our of trouble...
Can't wait to get my slippery hands on the HDSP MADI, then finally I can
make my dream of enough tracks at 96K come true with a single PCI card for
audio.
I will have to buy the ADI-648, but it's worth it...
P錶 Svennevig
下面是几个人的回答：
-----------------------------------------
I don't know why, but I can tell you that it works very well. I have a
Digiface and a Multiface. The Digiface system runs SAWStudio and Samplitude
7, and I'm very happy with the results.
Bill
------------------------------
I'm not a technical guy, but I can tell you after using Creamware TripleDAT,
Delta 1010 and some other various cards over the years, to me, this product
wipes out the competition. I did some hard, long, serious shopping before I
wound up buying 2 Multifaces. As far as I can tell, nothing, nothing,
nothing comes close. They rock. And look at this NG. It also rocks with
support. Drivers, help. hardware support at a flick of a wrist. NOBODY can
offer that.
Just my 2 sense.
Greg
------------------------------
（此人是美国一个专业销售公司的）
Basically because the development teams have had a long history of working
together and the fact that we sell and support both products...giving the
end user and dealer a one stop solution with no hassles...sounds like a nice
concept eh?
We support all soundcard manufacturers with regards to Samp but I can assure
you we will always provide better support with the Magix/RME combo because
it's what we know best...
Tom Sailor
www.xvisionaudio.com
----------------------------------------
Not only know best, but it simply is the best.
In my opinion nothing touches RME Hammerfall DSP technology.
And their tech. number isn't BS either, 0% CPU load with ASIO in a HDSP card
simply is true.
Compare that to a sloppy written ASIO driver on a non busmaster card.
I've seen to many ASIO drivers/audiocards that load the CPU around 50% when
using ASIO.
To me it is simple: Buy RME, stay our of trouble...
Can't wait to get my slippery hands on the HDSP MADI, then finally I can
make my dream of enough tracks at 96K come true with a single PCI card for
audio.
I will have to buy the ADI-648, but it's worth it...
P錶 Svennevig